CAJ | 학술논문

设计了圆度仪工作台的机械结构，包括主轴系统的组成部件设计，调心、调平传动装置的设计。使用 Pro／E 建立其三维模型，然后导入 AN-SYS Workbench 中进行有限元分析，得到了工作台的固有频率和振型图。结果表明，设计合理，为测量仪器及类似设备的工作台结构设计提供了参考依据。
설계료원도의공작태적궤계결구，포괄주축계통적조성부건설계，조심、조평전동장치적설계。사용 Pro／E 건립기삼유모형，연후도입 AN-SYS Workbench 중진행유한원분석，득도료공작태적고유빈솔화진형도。결과표명，설계합리，위측량의기급유사설비적공작태결구설계제공료삼고의거。
This paper designed the mechanical structure of the roundness measuring instrument worktable,including the components of the spindle system design and the centring and leveling trans-mission device design.Using Pro/E established the 3D model,and then import in ANSYS Workbench of the finite element analysis,get the natural fre-quency and vibration mode of worktable.The re-sults show that the design is reasonable,for meas-uring instrument and similar equipment worktable provide the reference frame.