应用光学
應用光學
응용광학
JOURNAL OF APPLIED OPTICS
2015年
3期
381-385
,共5页
直下式透镜%自由曲面%抛物面%均匀照明
直下式透鏡%自由麯麵%拋物麵%均勻照明
직하식투경%자유곡면%포물면%균균조명
direct type lens%free-form surface%paraboloid%uniform illumination
对于近场大角度的匀光照明系统,透镜的一般设计方法是采用内表面为球形的自由曲面透镜设计,计算的自由曲面透镜只需考虑一次折射.但是当角度达到一定范围时,在透镜的内表面容易发生全反射,导致目标面照度不均匀.为了在近场照明系统中得到更大角度的配光,提出一种以合适的抛物面作为自由曲面透镜的内表面的设计方法,内抛物面先对光源的能量进行一次扩散,再计算自由曲面面型,通过模拟仿真,实现了在距离光源15 mm处形成半径40 mm的光斑,均匀度达到95%,能量利用率达到97.8%,相对于传统的直下式透镜,提高了照明的均匀度,同时减少了箱体的厚度.
對于近場大角度的勻光照明繫統,透鏡的一般設計方法是採用內錶麵為毬形的自由麯麵透鏡設計,計算的自由麯麵透鏡隻需攷慮一次摺射.但是噹角度達到一定範圍時,在透鏡的內錶麵容易髮生全反射,導緻目標麵照度不均勻.為瞭在近場照明繫統中得到更大角度的配光,提齣一種以閤適的拋物麵作為自由麯麵透鏡的內錶麵的設計方法,內拋物麵先對光源的能量進行一次擴散,再計算自由麯麵麵型,通過模擬倣真,實現瞭在距離光源15 mm處形成半徑40 mm的光斑,均勻度達到95%,能量利用率達到97.8%,相對于傳統的直下式透鏡,提高瞭照明的均勻度,同時減少瞭箱體的厚度.
대우근장대각도적균광조명계통,투경적일반설계방법시채용내표면위구형적자유곡면투경설계,계산적자유곡면투경지수고필일차절사.단시당각도체도일정범위시,재투경적내표면용역발생전반사,도치목표면조도불균균.위료재근장조명계통중득도경대각도적배광,제출일충이합괄적포물면작위자유곡면투경적내표면적설계방법,내포물면선대광원적능량진행일차확산,재계산자유곡면면형,통과모의방진,실현료재거리광원15 mm처형성반경40 mm적광반,균균도체도95%,능량이용솔체도97.8%,상대우전통적직하식투경,제고료조명적균균도,동시감소료상체적후도.