光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2015年
5期
52-57
,共6页
毕卫红%李敬阳%杨希鹏%付兴虎%付广伟
畢衛紅%李敬暘%楊希鵬%付興虎%付廣偉
필위홍%리경양%양희붕%부흥호%부엄위
布里渊光时域反射%分布式温度传感%微波电光调制%参考光功率%稳定控制
佈裏淵光時域反射%分佈式溫度傳感%微波電光調製%參攷光功率%穩定控製
포리연광시역반사%분포식온도전감%미파전광조제%삼고광공솔%은정공제
Brillouin optical time domain reflectometer%distributed temperature sensor%microwave electro-optic modulator%reference light power%stable control
在基于微波电光调制的布里渊光时域反射分布式温度传感系统中,使用微波扫频会造成电光调制器输出的参考光功率波动,根据相干检测的原理,参考光功率的波动会影响到测得的后向布里渊散射信号的功率,将直接影响布里渊散射谱的测量精度,导致较大的温度测量误差。因此,提出一种根据电光调制器输出光功率反馈调节微波源功率,以稳定布里渊光时域反射系统参考光功率的方法。实验结果表明,该方法可以有效抑制电光调制器输出的一阶边波带峰值功率的波动,使系统的温度测量精度从6℃提高到了2℃。
在基于微波電光調製的佈裏淵光時域反射分佈式溫度傳感繫統中,使用微波掃頻會造成電光調製器輸齣的參攷光功率波動,根據相榦檢測的原理,參攷光功率的波動會影響到測得的後嚮佈裏淵散射信號的功率,將直接影響佈裏淵散射譜的測量精度,導緻較大的溫度測量誤差。因此,提齣一種根據電光調製器輸齣光功率反饋調節微波源功率,以穩定佈裏淵光時域反射繫統參攷光功率的方法。實驗結果錶明,該方法可以有效抑製電光調製器輸齣的一階邊波帶峰值功率的波動,使繫統的溫度測量精度從6℃提高到瞭2℃。
재기우미파전광조제적포리연광시역반사분포식온도전감계통중,사용미파소빈회조성전광조제기수출적삼고광공솔파동,근거상간검측적원리,삼고광공솔적파동회영향도측득적후향포리연산사신호적공솔,장직접영향포리연산사보적측량정도,도치교대적온도측량오차。인차,제출일충근거전광조제기수출광공솔반궤조절미파원공솔,이은정포리연광시역반사계통삼고광공솔적방법。실험결과표명,해방법가이유효억제전광조제기수출적일계변파대봉치공솔적파동,사계통적온도측량정도종6℃제고도료2℃。
In the distributed temperature sensing system of Brillouin optical time domain reflectometer based on the electro-optical modulation, the power of reference light exported from the electro-optic modulator will fluctuate while using microwave sweeper. According to the principle of correlation detection, the fluctuations of reference light power will affect the power of Brillouin scattering light,and it will cause large error in temperature measurement. Therefore, a method that can adjust the microwave power based on the output light power feedback of electro-optic modulator has been proposed to keep the power of reference light of Brillouin optical time domain reflectometer stable. The experimental results show that the method can suppress the fluctuation of the first-order edge wave band peak power exported from the electro-optic modulator effectively, and the temperature measuring accuracy has been increased from 6℃to 2℃.