CAJ | 학술논문

采用MC方法对井型HPGe探测器全能峰探测效率进行虚拟刻度。通过改变点源在井中的位置，研究了其探测效率变化规律，并进行了实验验证；同时模拟计算了探测器对0．1～1MeV能量的探测效率。模拟与实验结果表明：137 Cs放射源在井中不同位置的实验测量结果与模拟值最大相对误差6．8％，最小相对误差1．5％；探测效率随放射源离井底距离增加而减小，随入射射线能量增大而减小。
채용MC방법대정형HPGe탐측기전능봉탐측효솔진행허의각도。통과개변점원재정중적위치，연구료기탐측효솔변화규률，병진행료실험험증；동시모의계산료탐측기대0．1～1MeV능량적탐측효솔。모의여실험결과표명：137 Cs방사원재정중불동위치적실험측량결과여모의치최대상대오차6．8％，최소상대오차1．5％；탐측효솔수방사원리정저거리증가이감소，수입사사선능량증대이감소。
The Monte Carlo method is adopted to have a virtual calibration about the all-around peak detection efficiency of well-type HPGe detector.By changing the location of the point source in the well, the rule of the variation of detection efficiency is studied with experimental verification; meantime the detection efficiency of 0.1~1 MeV energy is simulated and calculated.The results of simulation and experiment show that the 137 Cs radioactive source in different position of the well has a maximum relative error of 6.8%and minimum relative error of 1.5%between the experimental measurement results and the simulation value.Detection efficiency de-creases with the increase of distance between radioactive source and the bottom of the well and decreases with the increase of energy of the incident ray.