炼油与化工
煉油與化工
련유여화공
REFINING AND CHEMICALS
2015年
2期
13-15
,共3页
DCC缓和首次开工%催化剂%流化%油浆固含量
DCC緩和首次開工%催化劑%流化%油漿固含量
DCC완화수차개공%최화제%류화%유장고함량
某催化裂化装置开工后油浆固含量高,文中结合实际工艺数据,与设计值进行比较,从催化剂流化的角度分析判断工艺操作使催化剂流化不正常,是导致油浆固含量高的主要原因.通过优化工艺,保持其它影响因素不变的前提下,将滑阀一次开度限制在2%以下,改善了催化剂流化状态,使油浆固含量由12~13g/L降至5~6 g/L,满足了工艺对油浆固含量的要求.
某催化裂化裝置開工後油漿固含量高,文中結閤實際工藝數據,與設計值進行比較,從催化劑流化的角度分析判斷工藝操作使催化劑流化不正常,是導緻油漿固含量高的主要原因.通過優化工藝,保持其它影響因素不變的前提下,將滑閥一次開度限製在2%以下,改善瞭催化劑流化狀態,使油漿固含量由12~13g/L降至5~6 g/L,滿足瞭工藝對油漿固含量的要求.
모최화열화장치개공후유장고함량고,문중결합실제공예수거,여설계치진행비교,종최화제류화적각도분석판단공예조작사최화제류화불정상,시도치유장고함량고적주요원인.통과우화공예,보지기타영향인소불변적전제하,장활벌일차개도한제재2%이하,개선료최화제류화상태,사유장고함량유12~13g/L강지5~6 g/L,만족료공예대유장고함량적요구.