CAJ | 학술논문

针对设定值控制多入多出（MIMO）系统在外界干扰下系统自由度低和鲁棒性差的问题，提出了兼顾定值控制与鲁棒性的基于三角区间软约束的模型预测控制算法。文中算法在设定值控制的基础上增加了三角区间软约束，使得控制目标分阶段达成，以减小干扰对系统的影响，提高系统自由度及鲁棒性。最后，对算法的鲁棒性进行了分析，并采用 Shell 公司的典型重油分馏塔进行仿真实验，通过与设定值控制结果的对比，证明了文中算法有更好的鲁棒性及更优良的控制品质。
침대설정치공제다입다출（MIMO）계통재외계간우하계통자유도저화로봉성차적문제，제출료겸고정치공제여로봉성적기우삼각구간연약속적모형예측공제산법。문중산법재설정치공제적기출상증가료삼각구간연약속，사득공제목표분계단체성，이감소간우대계통적영향，제고계통자유도급로봉성。최후，대산법적로봉성진행료분석，병채용 Shell 공사적전형중유분류탑진행방진실험，통과여설정치공제결과적대비，증명료문중산법유경호적로봉성급경우량적공제품질。
The set point control strategy has low degree of freedom and bad robustness by the influence of outside interference. In order to resolve this problem and improve control quality, an improved algorithm, model predictive control algorithm based on triangular interval soft constraint, was presented. On the basis of set point control triangular interval soft constraints were added and system output reached the control objectives in stages, to reduce the influence of interference on the system and to improve degree of freedom and robustness. Finally, robustness of the algorithm was analyzed. Simulation experiment was done with the typical heavy oil fractionator model of Shell Company. Comparison with the results of set point control proved that the algorithm had better robustness and better control quality.