机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2015年
6期
134-137
,共4页
李军%王艺颖%陈实%曾志平
李軍%王藝穎%陳實%曾誌平
리군%왕예영%진실%증지평
节水马桶%单片机%FLUENT
節水馬桶%單片機%FLUENT
절수마통%단편궤%FLUENT
Water-Saving Closestool%SCM%FLUENT
针对现有节水马桶洁净度不高,机械系统复杂易坏,研制了一种涡旋喷射节水马桶系统装置.系统以STC89C52单片机作为主控制器,并结合继电器、电磁阀等完成了系统的硬件设计;以Keil uvision4为软件设计设计平台编写了系统程序.并设计了一种涡旋喷射喷头,实现了一种节水、水压要求低且清洗洁净度高的节水型坐便器.为了验证该系统装置的节水效果,利用FLUENT软件对涡旋喷射喷头和普通喷头进行速度和压力的对比分析,分析结果表明,本系统装置的喷头出口有较好的速度和压力,具有良好的节水性能.系统通过水封回复、平均用水量和排放性能测试,测试结果表明该系统在电磁阀依次导通时间为2/2/4.5s时综合性能最佳,并比普通节水马桶节水43%.
針對現有節水馬桶潔淨度不高,機械繫統複雜易壞,研製瞭一種渦鏇噴射節水馬桶繫統裝置.繫統以STC89C52單片機作為主控製器,併結閤繼電器、電磁閥等完成瞭繫統的硬件設計;以Keil uvision4為軟件設計設計平檯編寫瞭繫統程序.併設計瞭一種渦鏇噴射噴頭,實現瞭一種節水、水壓要求低且清洗潔淨度高的節水型坐便器.為瞭驗證該繫統裝置的節水效果,利用FLUENT軟件對渦鏇噴射噴頭和普通噴頭進行速度和壓力的對比分析,分析結果錶明,本繫統裝置的噴頭齣口有較好的速度和壓力,具有良好的節水性能.繫統通過水封迴複、平均用水量和排放性能測試,測試結果錶明該繫統在電磁閥依次導通時間為2/2/4.5s時綜閤性能最佳,併比普通節水馬桶節水43%.
침대현유절수마통길정도불고,궤계계통복잡역배,연제료일충와선분사절수마통계통장치.계통이STC89C52단편궤작위주공제기,병결합계전기、전자벌등완성료계통적경건설계;이Keil uvision4위연건설계설계평태편사료계통정서.병설계료일충와선분사분두,실현료일충절수、수압요구저차청세길정도고적절수형좌편기.위료험증해계통장치적절수효과,이용FLUENT연건대와선분사분두화보통분두진행속도화압력적대비분석,분석결과표명,본계통장치적분두출구유교호적속도화압력,구유량호적절수성능.계통통과수봉회복、평균용수량화배방성능측시,측시결과표명해계통재전자벌의차도통시간위2/2/4.5s시종합성능최가,병비보통절수마통절수43%.