工程质量
工程質量
공정질량
QUALITY OF CIVIL ENGINEERING AND CONSTRUCTION
2015年
6期
12-14
,共3页
铝合金推拉窗%水密性能%气密性能%试验研究
鋁閤金推拉窗%水密性能%氣密性能%試驗研究
려합금추랍창%수밀성능%기밀성능%시험연구
aluminum alloy push-pull window%watertight performance%airtight performance%test research
为探索铝合金推拉窗极限气密、水密性能(以下简称二性),对不同型材、不同构造措施的铝合金推拉窗二性进行对比试验。从试验情况看,推拉窗二性与施工制作、安装质量关系较大,但随着试验等级的提高,发现推拉窗的水密性主要取决于型材本身结构构造。因此,在台风多发地区要提高外门窗水密性设防能力,减少外门窗渗漏,应从设计选材到施工制作等方面进行总体考虑。本次试验还否定了工程上习惯认为铝合金推拉窗水密性能只能达到3~4级的错误认识。只要选材合理,精心施工,铝合金推拉窗的水密性可以达到6级标准[1],能满足绝大部分工程对外门窗的性能要求。
為探索鋁閤金推拉窗極限氣密、水密性能(以下簡稱二性),對不同型材、不同構造措施的鋁閤金推拉窗二性進行對比試驗。從試驗情況看,推拉窗二性與施工製作、安裝質量關繫較大,但隨著試驗等級的提高,髮現推拉窗的水密性主要取決于型材本身結構構造。因此,在檯風多髮地區要提高外門窗水密性設防能力,減少外門窗滲漏,應從設計選材到施工製作等方麵進行總體攷慮。本次試驗還否定瞭工程上習慣認為鋁閤金推拉窗水密性能隻能達到3~4級的錯誤認識。隻要選材閤理,精心施工,鋁閤金推拉窗的水密性可以達到6級標準[1],能滿足絕大部分工程對外門窗的性能要求。
위탐색려합금추랍창겁한기밀、수밀성능(이하간칭이성),대불동형재、불동구조조시적려합금추랍창이성진행대비시험。종시험정황간,추랍창이성여시공제작、안장질량관계교대,단수착시험등급적제고,발현추랍창적수밀성주요취결우형재본신결구구조。인차,재태풍다발지구요제고외문창수밀성설방능력,감소외문창삼루,응종설계선재도시공제작등방면진행총체고필。본차시험환부정료공정상습관인위려합금추랍창수밀성능지능체도3~4급적착오인식。지요선재합리,정심시공,려합금추랍창적수밀성가이체도6급표준[1],능만족절대부분공정대외문창적성능요구。
Comparative trial on different sections,different construction measures of aluminum alloy push-pull window two performances were carried out for exploring the aluminum alloy push-pull window airtight, watertight performance limit(hereinafter referred to as two performances).From the test,two performances had much to do with the quality of construction production and installation,but with the improvement of test grades,it was found that the water tightness of push-pull window structure depends mainly on material itself.Therefore,in the typhoon prone areas to improve the ability of outside doors and windows watertightness fortification,to reduce the leakage of outside doors and windows should make overall consideration on design material selection to production construction,etc.The test also denied engineering habits that aluminum alloy push-pull window watertight performance can only reach grade 3~4.As long as to make reasonable material selection,careful work,water tightness of the alloy push-pull window can reach the standard level 6[1],for the most part can meet the engineering performance requirements of the external doors and windows.