CAJ | 학술논문

结合工程实际，对4台凿井绞车悬吊吊盘和大模板提升过程进行控制系统设计。设计中加入的增量编码器、倾角传感器、压力传感器、显示报警等装置，可实现对多台凿井绞车的同步安全控制。该集中监控系统应用于马脊梁煤矿副立井工程，起到了应有的作用，实现了多台凿井绞车同步提升控制，并且就位准确，运行安全，加快了井筒施工速度，取得了最高月进尺达138 m 的好成绩。
결합공정실제，대4태착정교차현조조반화대모판제승과정진행공제계통설계。설계중가입적증량편마기、경각전감기、압력전감기、현시보경등장치，가실현대다태착정교차적동보안전공제。해집중감공계통응용우마척량매광부립정공정，기도료응유적작용，실현료다태착정교차동보제승공제，병차취위준학，운행안전，가쾌료정통시공속도，취득료최고월진척체138 m 적호성적。
In combination with the engineering fact ,a design on the control system was conducted for the 4 set mine shaft sinking winches suspended sinking stages and large formwork lifting process .An incremental encoder ,obliquity sensor ,pressure sensor ,alarm display and other devices were applied in the design and could realize a synchronous safety control of several set mine shaft sinking winches . The centralized monitoring and control system was applied to a mine auxiliary shaft project of Maji -liang Mine ,was played the due function and realized the synchronous lifting control of several set mine shaft sinking winches .The positioning was accurate ,the operation was safe ,the construction speed of the mine shaft was speeded up and a good achievement of a max month sinking rate was 138 m .