红外技术
紅外技術
홍외기술
INFRARED TECHNOLOGY
2015年
5期
368-373
,共6页
田留德%刘朝晖%赵建科%赵怀学%潘亮%段亚轩%龙江波%周艳
田留德%劉朝暉%趙建科%趙懷學%潘亮%段亞軒%龍江波%週豔
전류덕%류조휘%조건과%조부학%반량%단아헌%룡강파%주염
热像仪%最小可分辨温差%测试方法%性能评价%修正模型
熱像儀%最小可分辨溫差%測試方法%性能評價%脩正模型
열상의%최소가분변온차%측시방법%성능평개%수정모형
infrared imaging%MRTD%measurement method%performance evaluation%correction model
MRTD是评价热成像系统综合性能的重要参数。分析了热像仪参数测试系统的两种基本结构,比较各自的优缺点,给出了各自应用场所。研究了MRTD测试对热像仪参数测试系统各组成单元的具体要求。根据 MRTD 参数的特点,分析了引起 MRTD 测试结果一致性较差的原因,给出了相应的解决措施和修正方法。为验证解决措施和修正模型的正确性,以一个热像仪为例进行了M RT D测试,并将测试结果与该热像仪的出厂结果比对,测试结果偏差小于15%。实验表明,该修正模型可以提高MRTD测试结果的重复性和准确性。
MRTD是評價熱成像繫統綜閤性能的重要參數。分析瞭熱像儀參數測試繫統的兩種基本結構,比較各自的優缺點,給齣瞭各自應用場所。研究瞭MRTD測試對熱像儀參數測試繫統各組成單元的具體要求。根據 MRTD 參數的特點,分析瞭引起 MRTD 測試結果一緻性較差的原因,給齣瞭相應的解決措施和脩正方法。為驗證解決措施和脩正模型的正確性,以一箇熱像儀為例進行瞭M RT D測試,併將測試結果與該熱像儀的齣廠結果比對,測試結果偏差小于15%。實驗錶明,該脩正模型可以提高MRTD測試結果的重複性和準確性。
MRTD시평개열성상계통종합성능적중요삼수。분석료열상의삼수측시계통적량충기본결구,비교각자적우결점,급출료각자응용장소。연구료MRTD측시대열상의삼수측시계통각조성단원적구체요구。근거 MRTD 삼수적특점,분석료인기 MRTD 측시결과일치성교차적원인,급출료상응적해결조시화수정방법。위험증해결조시화수정모형적정학성,이일개열상의위례진행료M RT D측시,병장측시결과여해열상의적출엄결과비대,측시결과편차소우15%。실험표명,해수정모형가이제고MRTD측시결과적중복성화준학성。
MRTD is an important parameter to evaluate the comprehensive performance of thermal imaging systems. The structure of two common test systems for testing thermal imagers is analyzed, whose advantages and disadvantages are compared and their application is given. The specific requirements on each part of test system are studied. According to the characteristics of MRTD, the causes of MRTD test result’s poor uniformity is analyzed, and the corresponding solution and correction model are given. In order to test and verify the correctness of the solution and correction model, a thermal imager is used as an example for MRTD testing. Compared with the test results of manufacturer, the maximum deviation is less than 15%. The test results show that the correction model can improve repeatability and accuracy of MRTD test results.