光谱学与光谱分析
光譜學與光譜分析
광보학여광보분석
SPECTROSCOPY AND SPECTRAL ANALYSIS
2015年
6期
1529-1533
,共5页
侯培国%李宁%常江%王书涛%宋涛
侯培國%李寧%常江%王書濤%宋濤
후배국%리저%상강%왕서도%송도
矿物油检测%FTIR-ATR%SPXY%SG平滑%迭代Bagging偏最小二乘法
礦物油檢測%FTIR-ATR%SPXY%SG平滑%迭代Bagging偏最小二乘法
광물유검측%FTIR-ATR%SPXY%SG평활%질대Bagging편최소이승법
Mineral oil%FTIR-ATR%SPXY%SG smoothing%IBPLS
快速准确地检测水中矿物油的种类与含量对污染源及时排查和控制具有重要的意义,而红外光谱分析技术检测水中矿物油具有高效、快速、无污染的优势。为获得更加可靠的分析结果应用傅里叶变换衰减全反射红外光谱(FTIR‐ATR)技术获取矿物油样品的光谱信息,采用SPXY法划分样本集。对偏最小二乘法(PLS)和迭代Bagging偏最小二乘法(IBPLS)这两种建立回归模型的方法进行对比分析,还比较了采用Savitzky‐Golay(SG)平滑方法与迭代Bagging偏最小二乘法(IBPLS)相结合和单一采用迭代Bagging偏最小二乘法建立回归模型的区别。通过对预测回归曲线进行对比,得出通过SG平滑的预测效果明显优于未做的。而且采用SG平滑方法和IBPLS相结合的方法建立回归模型时,汽油模型参数RMSEP为0.001125 g?mL -1,r为0.9925;柴油模型参数RMSEP为0.001384 g?mL -1,r为0.9893。
快速準確地檢測水中礦物油的種類與含量對汙染源及時排查和控製具有重要的意義,而紅外光譜分析技術檢測水中礦物油具有高效、快速、無汙染的優勢。為穫得更加可靠的分析結果應用傅裏葉變換衰減全反射紅外光譜(FTIR‐ATR)技術穫取礦物油樣品的光譜信息,採用SPXY法劃分樣本集。對偏最小二乘法(PLS)和迭代Bagging偏最小二乘法(IBPLS)這兩種建立迴歸模型的方法進行對比分析,還比較瞭採用Savitzky‐Golay(SG)平滑方法與迭代Bagging偏最小二乘法(IBPLS)相結閤和單一採用迭代Bagging偏最小二乘法建立迴歸模型的區彆。通過對預測迴歸麯線進行對比,得齣通過SG平滑的預測效果明顯優于未做的。而且採用SG平滑方法和IBPLS相結閤的方法建立迴歸模型時,汽油模型參數RMSEP為0.001125 g?mL -1,r為0.9925;柴油模型參數RMSEP為0.001384 g?mL -1,r為0.9893。
쾌속준학지검측수중광물유적충류여함량대오염원급시배사화공제구유중요적의의,이홍외광보분석기술검측수중광물유구유고효、쾌속、무오염적우세。위획득경가가고적분석결과응용부리협변환쇠감전반사홍외광보(FTIR‐ATR)기술획취광물유양품적광보신식,채용SPXY법화분양본집。대편최소이승법(PLS)화질대Bagging편최소이승법(IBPLS)저량충건립회귀모형적방법진행대비분석,환비교료채용Savitzky‐Golay(SG)평활방법여질대Bagging편최소이승법(IBPLS)상결합화단일채용질대Bagging편최소이승법건립회귀모형적구별。통과대예측회귀곡선진행대비,득출통과SG평활적예측효과명현우우미주적。이차채용SG평활방법화IBPLS상결합적방법건립회귀모형시,기유모형삼수RMSEP위0.001125 g?mL -1,r위0.9925;시유모형삼수RMSEP위0.001384 g?mL -1,r위0.9893。
Rapidly and accurately detection of the type and content of mineral oil in water pollution has important significance for the timely screening and control of pollution sources .The use of infrared spectral analysisi technology to detect mineral oil has advantanges of efficient ,fast and pollution‐free .Infrared spectrum technology is very for the detection of mineral oil in the wa‐ter .In order to obtain a more reliable results ,Fourier transforms attenuated total reflection infrared spectrometry (FITR‐ATR) technology is used to get the spectral information of the mineral oil sample ,and SPXY method is used to divide the sample set . The paper not only analyzed partial least squares (PLS) and iterative Bagging partial least squares (IBPLS) the two different methods to build regression model ,also compared the difference of using the method of the combination of Savitzky‐Golay (SG) smoothing and the method of a single iterative Bagging partial least squares (IBPLS) regression model .Based on the comparison of the predictive regression curve ,we can get that the SG smooth has a better reflection on the results .And when the method of the combination of Savitzky‐Golay (SG) smoothing and the method of a single iterative Bagging partial least squares (IBPLS) is used to build the regression model ,the gasoline model parameters RMSEP is 0.001 125 g?mL -1 ,R is 0.992 5;diesel model parameters RMSEP is 0.001 384 g?mL -1 ,R is 0.989 3 .