地球
地毬
지구
EARTH
2015年
8期
467-467,11
,共2页
冷浸取%泡沫塑料%电感耦合等离子体光谱法%化探样品%金%铂%钯
冷浸取%泡沫塑料%電感耦閤等離子體光譜法%化探樣品%金%鉑%鈀
랭침취%포말소료%전감우합등리자체광보법%화탐양품%금%박%파
cold soaking%foam plastics%inductive coupling Plasma Atomic Emission Spectrometry%Chemical probing sample%gold﹑platinum﹑palladium
建立了冷浸--泡沫塑料富集,采用 ICP-AES 测定地球化学勘探样品中超痕量金、铂、钯的方法,并试验了冷浸取、泡沫塑料富集时各种因素的影响;确定了采用氯化钠、盐酸和高锰酸钾冷浸取分解试样,以泡沫塑料富集、灰化,残渣用王水溶解,用电感耦合等离子体发射光谱法测定的条件。该方法检出限分别为:Au 0.039ng/g,Pt 0.040ng/g,Pd 0.058ng/g;回收率为95.6%~102.5%之间;测量精密度( RSD%)为:Au 4.85%,Pt 5.76%,Pd 6.45%。采用该方法测定了国家一级地球化学标准物质中的痕量 Au,Pt,Pd,测定值与标准值符合规范要求。
建立瞭冷浸--泡沫塑料富集,採用 ICP-AES 測定地毬化學勘探樣品中超痕量金、鉑、鈀的方法,併試驗瞭冷浸取、泡沫塑料富集時各種因素的影響;確定瞭採用氯化鈉、鹽痠和高錳痠鉀冷浸取分解試樣,以泡沫塑料富集、灰化,殘渣用王水溶解,用電感耦閤等離子體髮射光譜法測定的條件。該方法檢齣限分彆為:Au 0.039ng/g,Pt 0.040ng/g,Pd 0.058ng/g;迴收率為95.6%~102.5%之間;測量精密度( RSD%)為:Au 4.85%,Pt 5.76%,Pd 6.45%。採用該方法測定瞭國傢一級地毬化學標準物質中的痕量 Au,Pt,Pd,測定值與標準值符閤規範要求。
건립료랭침--포말소료부집,채용 ICP-AES 측정지구화학감탐양품중초흔량금、박、파적방법,병시험료랭침취、포말소료부집시각충인소적영향;학정료채용록화납、염산화고맹산갑랭침취분해시양,이포말소료부집、회화,잔사용왕수용해,용전감우합등리자체발사광보법측정적조건。해방법검출한분별위:Au 0.039ng/g,Pt 0.040ng/g,Pd 0.058ng/g;회수솔위95.6%~102.5%지간;측량정밀도( RSD%)위:Au 4.85%,Pt 5.76%,Pd 6.45%。채용해방법측정료국가일급지구화학표준물질중적흔량 Au,Pt,Pd,측정치여표준치부합규범요구。
In this paper, we set up the enrichment of cold soaking foam plastics by adopting the method of ICP-AES to test the ultra-trace of gold, platinum and palladium from the geochemical exploration sample and studied all kinds of effective factors in cold soaking foam plastics enrichment. And we confirmed the requirements of using sodi-um chloride, hydrochloric acid and potassium permanganate cold soak-ing to decompose the sample, using foam plastics to enrich and ash, aqua regia to dissolve residue, and measuring by inductive coupling Plasma Atomic Emission Spectrometry. The detection limits of this method are as follows: detection limit: Au 0.039ng/g, Pt 0.040ng/g, Pd 0.058ng/g; recovery rate: between 95.9% and 102.2%; relative stan-dard deviation (RSD%): Au 4.85%,Pt 5.76%,Pd 6.45%.We tested the trace amount of Au, Pt and Pd in the country-level geochemistry stan-dard substance. The measured value is consistent with the normalized value.