原子能科学技术
原子能科學技術
원자능과학기술
ATOMIC ENERGY SCIENCE AND TECHNOLOGY
2015年
6期
1137-1142
,共6页
吕海雷%初丽丽%张存平
呂海雷%初麗麗%張存平
려해뢰%초려려%장존평
放射性固体废物%预压缩%一维应力压缩%压缩策略%废物最小化
放射性固體廢物%預壓縮%一維應力壓縮%壓縮策略%廢物最小化
방사성고체폐물%예압축%일유응력압축%압축책략%폐물최소화
radioactive solid waste%precompression%one-dimension stress compression%compression strategy%waste minimization
通过对放射性固体废物桶内压缩过程的研究,建立了废物桶内一维应力压缩模型,并根据模型设计最优压缩策略对放射性固体废物装填进行指导。结果表明,不同的压缩策略废物的装填总量以及压缩后的桶内装填效率差别较大,装填总量相差1倍左右,装填效率相差20%~30%。采用压缩策略的装填方式较无序装填方式在废物减容方面提高10%左右,且废物装填次数也显著降低,符合工程应用与废物最小化要求。
通過對放射性固體廢物桶內壓縮過程的研究,建立瞭廢物桶內一維應力壓縮模型,併根據模型設計最優壓縮策略對放射性固體廢物裝填進行指導。結果錶明,不同的壓縮策略廢物的裝填總量以及壓縮後的桶內裝填效率差彆較大,裝填總量相差1倍左右,裝填效率相差20%~30%。採用壓縮策略的裝填方式較無序裝填方式在廢物減容方麵提高10%左右,且廢物裝填次數也顯著降低,符閤工程應用與廢物最小化要求。
통과대방사성고체폐물통내압축과정적연구,건립료폐물통내일유응력압축모형,병근거모형설계최우압축책략대방사성고체폐물장전진행지도。결과표명,불동적압축책략폐물적장전총량이급압축후적통내장전효솔차별교대,장전총량상차1배좌우,장전효솔상차20%~30%。채용압축책략적장전방식교무서장전방식재폐물감용방면제고10%좌우,차폐물장전차수야현저강저,부합공정응용여폐물최소화요구。
The one‐dimension stress compression model was built through the research on compression in drum for radioactive solid waste . The compression process was optimized by taking advantage of that model , and filling process of radioactive solid waste was guided .The test results show that big differences exist in total volume of filling and efficiency of filling after pre‐compression for different models .Comparing the best model with the worst model ,the volume of filling can double and the efficiency of filling increases 20%‐30% . T he volume reduction ratio increases 10% and times of waste filling obviously decreases guided by compression strategy compared with random filling .It can well meet the requirements of waste minimization and future operation .