粘接
粘接
점접
2015年
6期
56-58
,共3页
艾少华%赵景左%韩胜利%林洪梅
艾少華%趙景左%韓勝利%林洪梅
애소화%조경좌%한성리%림홍매
厌氧胶%螺纹锁固%平面密封%螺纹密封%填充间隙%零件固持
厭氧膠%螺紋鎖固%平麵密封%螺紋密封%填充間隙%零件固持
염양효%라문쇄고%평면밀봉%라문밀봉%전충간극%령건고지
anaerobic adhesive%thread locking%flat sealing%thread sealing%filling gap%retaining parts
简介了发明专利CN102516891(2012)中采用特定的单体以及促进剂搭配可以实现厌氧胶高填充间隙的方法。该胶室温条件下,呈液态或者膏状,初固时间10 min左右,填充间隙可达7.2 mm,贮存稳定性优异(80℃/2 h不凝胶),常温下在深色的聚乙烯塑料瓶(管)中可以保存2年以上。
簡介瞭髮明專利CN102516891(2012)中採用特定的單體以及促進劑搭配可以實現厭氧膠高填充間隙的方法。該膠室溫條件下,呈液態或者膏狀,初固時間10 min左右,填充間隙可達7.2 mm,貯存穩定性優異(80℃/2 h不凝膠),常溫下在深色的聚乙烯塑料瓶(管)中可以保存2年以上。
간개료발명전리CN102516891(2012)중채용특정적단체이급촉진제탑배가이실현염양효고전충간극적방법。해효실온조건하,정액태혹자고상,초고시간10 min좌우,전충간극가체7.2 mm,저존은정성우이(80℃/2 h불응효),상온하재심색적취을희소료병(관)중가이보존2년이상。
This article is the introduction of author's patent CN102516891(2012), this patent relates to the method of using specific combination of the monomers and accelerators to prepare the anaerobic adhesive suitable for larger gap fill. At room temperature, this anaerobic adhesive is liquid or paste, the fixing time is about 10 min, it can fill the gap up to 7.2 nm, the storage stability (80℃×2 h not gel) is excellent and it can stored for over two years at room temperature in the dark polyethylene plastic bottles(tubes).