应用化工
應用化工
응용화공
APPLIED CHEMICAL INDUSTRY
2015年
5期
821-825,829
,共6页
冯茹森%唐昊%孙建辉%周洋%蒲迪%郭拥军
馮茹森%唐昊%孫建輝%週洋%蒲迪%郭擁軍
풍여삼%당호%손건휘%주양%포적%곽옹군
疏水缔合聚合物%渗流特性%阻力系数%残余阻力系数%渗透率%聚集体尺寸
疏水締閤聚閤物%滲流特性%阻力繫數%殘餘阻力繫數%滲透率%聚集體呎吋
소수체합취합물%삼류특성%조력계수%잔여조력계수%삼투솔%취집체척촌
hydrophobic association polymer%flow characteristics%RF%RRF%permeability%aggregate size
利用串联平板夹砂渗流模型,研究了同粘度疏水缔合聚合物溶液在均质模型下的渗流特性。结果表明,在渗透率1.1~6.1μm2范围内,疏水缔合聚合物溶液在平板渗流模型中压力达到稳定的时间与疏水单体含量成正比;相同渗透率下,缔合聚合物在传播方向上的阻力系数和残余阻力系数呈增加趋势,且增加幅度与疏水单体含量成正比,而聚丙烯酰胺在介质中的渗流特性是不变的。采用微孔滤膜过滤方法,证明了疏水单体含量对渗流特性的影响在于其改变了溶液中聚集体尺寸。
利用串聯平闆夾砂滲流模型,研究瞭同粘度疏水締閤聚閤物溶液在均質模型下的滲流特性。結果錶明,在滲透率1.1~6.1μm2範圍內,疏水締閤聚閤物溶液在平闆滲流模型中壓力達到穩定的時間與疏水單體含量成正比;相同滲透率下,締閤聚閤物在傳播方嚮上的阻力繫數和殘餘阻力繫數呈增加趨勢,且增加幅度與疏水單體含量成正比,而聚丙烯酰胺在介質中的滲流特性是不變的。採用微孔濾膜過濾方法,證明瞭疏水單體含量對滲流特性的影響在于其改變瞭溶液中聚集體呎吋。
이용천련평판협사삼류모형,연구료동점도소수체합취합물용액재균질모형하적삼류특성。결과표명,재삼투솔1.1~6.1μm2범위내,소수체합취합물용액재평판삼류모형중압력체도은정적시간여소수단체함량성정비;상동삼투솔하,체합취합물재전파방향상적조력계수화잔여조력계수정증가추세,차증가폭도여소수단체함량성정비,이취병희선알재개질중적삼류특성시불변적。채용미공려막과려방법,증명료소수단체함량대삼류특성적영향재우기개변료용액중취집체척촌。
A series flat sand percolation model were used to study the flow characteristics of different hy-drophobic monomer content of hydrophobic associating polymer solution at the same viscosity. The results show that in the permeability range from 1. 1 to 6. 1 μm2 ,the injection pressure’s stable time of hydro-phobic association polymer solution was proportional to the hydrophobic monomer content in this model. Under the same permeability,RF and RRF tended to increase in the propagation direction of hydrophobic associating polymer solution,and the rate of increase is proportional to the hydrophobic monomer content, but polyacrylamide flow characteristics in the medium is constant. Microporous membrane filtration method was used to prove the influence of hydrophobic monomer content for the flow characteristics lies in chan-ging the aggregate size of the solution.