环境监控与预警
環境鑑控與預警
배경감공여예경
ENVIRONMENTAL MONITORING AND FOREWARNING
2015年
3期
28-30
,共3页
固定源%废气监测%传感器%监测参数
固定源%廢氣鑑測%傳感器%鑑測參數
고정원%폐기감측%전감기%감측삼수
Stationary sources%Emission monitoring%Transducer%Monitoring parameters
针对固定源废气监测过程中出现的关于监测仪器使用方面(包括传感器、内置泵及日常的校准),监测参数(包括动压、过量空气系数),采样位置不符合要求、烟道面积过大,运行负荷如何确定等常见问题进行了分析、探讨与总结,并提出了相应的改进方法和建议。
針對固定源廢氣鑑測過程中齣現的關于鑑測儀器使用方麵(包括傳感器、內置泵及日常的校準),鑑測參數(包括動壓、過量空氣繫數),採樣位置不符閤要求、煙道麵積過大,運行負荷如何確定等常見問題進行瞭分析、探討與總結,併提齣瞭相應的改進方法和建議。
침대고정원폐기감측과정중출현적관우감측의기사용방면(포괄전감기、내치빙급일상적교준),감측삼수(포괄동압、과량공기계수),채양위치불부합요구、연도면적과대,운행부하여하학정등상견문제진행료분석、탐토여총결,병제출료상응적개진방법화건의。
This paper aimed at analyzing,discussing,and summarizing the problems during the operation of emission monitoring e-quipment of stationary sources,as well as proposing improved methods and suggestions to solve these problems.Specifically,these problems included failure of the monitoring equipment due to the transducer,the built -in pump,and daily calibration,determination of monitoring parameters containing dynamic pressure and excess air ratio,nonstandard sampling locations,excess large flue area and the uncertain operating load.