CAJ | 학술논문

采用C FD方法对简单调压室和阻抗式调压室进行数值模拟，计算出不同分流比下，调压室的阻力系数值，将模拟结果同文献中的试验值进行对比分析。结果表明，模拟曲线和试验曲线的趋势基本一致，并且模拟数值和试验数值高度吻合，该方法可应用在调压室的阻力系数研究中。在此基础之上，该方法应用在实际电站调压室的模拟中，并通过水力过渡过程的计算，验证了该结果的准确性。最后得出结论， C FD方法可应用于调压室的设计计算。
채용C FD방법대간단조압실화조항식조압실진행수치모의，계산출불동분류비하，조압실적조력계수치，장모의결과동문헌중적시험치진행대비분석。결과표명，모의곡선화시험곡선적추세기본일치，병차모의수치화시험수치고도문합，해방법가응용재조압실적조력계수연구중。재차기출지상，해방법응용재실제전참조압실적모의중，병통과수력과도과정적계산，험증료해결과적준학성。최후득출결론， C FD방법가응용우조압실적설계계산。
CFD method was adopted for simple surge chamber and impedance surge chamber by numerical simulation ,surge chamber resistance coefficient values were calculated with different split ratios ,and the simulation results and the experimental data were analyzed . The results showed , simulation and experimental curves were basically the same trend , numerical simulation and experimental values agree well ,therefore ,and the research can be initially determined that the method can be applied in the drag coefficient of the surge chamber .On this basis ,this method was applied in the simulation of practical power station surge chamber ,and through the calculation of hydraulic transition process ,the accuracy of the results was verified .CFD method can be applied in the design of surge chamber calculation .