绝缘材料
絕緣材料
절연재료
INSULATING MATERIALS
2015年
6期
25-29
,共5页
曾亮%朱伟%李忠良%蒋大伟%黄友根%李鸿岩
曾亮%硃偉%李忠良%蔣大偉%黃友根%李鴻巖
증량%주위%리충량%장대위%황우근%리홍암
大功率IGBT%环氧树脂灌封胶%流变性能%黏度模型
大功率IGBT%環氧樹脂灌封膠%流變性能%黏度模型
대공솔IGBT%배양수지관봉효%류변성능%점도모형
high-power IGBT%epoxy pouring sealant%rheological property%viscosity model
为研究大功率IGBT用环氧树脂灌封胶体系的流变性能,以黏度为数据基础,建立了与黏度数据基本吻合的流变学黏度模型方程,并分析环氧胶的使用工艺。结果表明:环氧树脂灌封胶在50~90℃内起始黏度低,可操作时间大于30 min,且后期固化速率较高,符合IGBT模块的灌封使用要求。建立的黏度模型方程能有效预测环氧胶体系的流变特性,并为拟订合理的工艺参数提供参考。
為研究大功率IGBT用環氧樹脂灌封膠體繫的流變性能,以黏度為數據基礎,建立瞭與黏度數據基本吻閤的流變學黏度模型方程,併分析環氧膠的使用工藝。結果錶明:環氧樹脂灌封膠在50~90℃內起始黏度低,可操作時間大于30 min,且後期固化速率較高,符閤IGBT模塊的灌封使用要求。建立的黏度模型方程能有效預測環氧膠體繫的流變特性,併為擬訂閤理的工藝參數提供參攷。
위연구대공솔IGBT용배양수지관봉효체계적류변성능,이점도위수거기출,건립료여점도수거기본문합적류변학점도모형방정,병분석배양효적사용공예。결과표명:배양수지관봉효재50~90℃내기시점도저,가조작시간대우30 min,차후기고화속솔교고,부합IGBT모괴적관봉사용요구。건립적점도모형방정능유효예측배양효체계적류변특성,병위의정합리적공예삼수제공삼고。
To study the rheological property of epoxy pouring sealant for high-power IGBT, based on the viscosity data, we built a rheological viscosity model equation which was coincide with the viscosity data, and the use technology of epoxy pouring sealant was analyzed. The results show that the initial viscosity of the epoxy pouring sealant ranging from 50 ℃ to 90 ℃ is low, the operating time is more than 30 min, and the curing rate at later stage is higher, which can satisfy the operating requirement of potting for high-power IGBT. The viscosity model equation can predict the viscosity behavior of epoxy pouring sealant effectively, which can provide reference to formulating reasonable process parameters.