CAJ | 학술논문

为了便于测量立铣刀铣削温度，通过改进HSK A63刀柄的结构，把测温数据采集模块安装到刀柄内部，设计出热电偶测温刀柄。利用Pro／E5．0软件建立嵌入式测温刀柄主体、弹簧夹头／螺母、立铣刀的三维实体模型并进行装配，在 ANSYS Work-bench中确立合理的边界条件和网格划分的基础上对装配体进行模态分析，得出固有频率和振型。
위료편우측량립선도선삭온도，통과개진HSK A63도병적결구，파측온수거채집모괴안장도도병내부，설계출열전우측온도병。이용Pro／E5．0연건건립감입식측온도병주체、탄황협두／라모、립선도적삼유실체모형병진행장배，재 ANSYS Work-bench중학립합리적변계조건화망격화분적기출상대장배체진행모태분석，득출고유빈솔화진형。
In order to measure the end milling tem-perature of end mills and by improving the HSK A63 tool holder structure,a temperature measurement data acquisition module was installed into the tool holder and a thermocouple tool holder with temperature measurement was designed.A three dimensional solid model of the tool holder with temperature measure-ment was established and assembled along with a spring chuck/nut and flat end mill using a software program called Pro/E 5 .0 .Boundary constraints and meshing in finite element model were imposed and nat-ural frequency and mode shapes of the tool holder as-sembly were calculated by modal analysis using AN-SYS Workbench.