西南交通大学学报
西南交通大學學報
서남교통대학학보
JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY
2015年
3期
442-448
,共7页
鲁志文%董大伟%华春蓉%闫兵%谢逍%陈俊
魯誌文%董大偉%華春蓉%閆兵%謝逍%陳俊
로지문%동대위%화춘용%염병%사소%진준
目标定位%地震动%不均匀地质%TDOA%时延-等效传播速度检索表%五元十字阵
目標定位%地震動%不均勻地質%TDOA%時延-等效傳播速度檢索錶%五元十字陣
목표정위%지진동%불균균지질%TDOA%시연-등효전파속도검색표%오원십자진
target localization%seismic motion%anisotropic ground%TDOA (time difference of arrival)%time delay-equivalent propagation speed search table%five-sensor cross array
针对不均匀地质条件下地震动信号传播速度差异造成定位精度较低的问题,通过将位置域的传播速度转换为时延域的等效传播速度,提出了一种基于时延-等效传播速度检索表的到达时间差(TDOA)目标定位方法。对等腰直角三角形传感器阵列的定位盲区进行了仿真分析,为消除定位盲区,提出了五元十字阵传感器布置方法;进行了场地试验,对运动车辆进行目标定位,对基于时延-等效传播速度检索表的TDOA定位方法与固定传播速度TDOA定位方法的定位结果进行了比较,结果表明,前者的定位效果远优于后者。
針對不均勻地質條件下地震動信號傳播速度差異造成定位精度較低的問題,通過將位置域的傳播速度轉換為時延域的等效傳播速度,提齣瞭一種基于時延-等效傳播速度檢索錶的到達時間差(TDOA)目標定位方法。對等腰直角三角形傳感器陣列的定位盲區進行瞭倣真分析,為消除定位盲區,提齣瞭五元十字陣傳感器佈置方法;進行瞭場地試驗,對運動車輛進行目標定位,對基于時延-等效傳播速度檢索錶的TDOA定位方法與固定傳播速度TDOA定位方法的定位結果進行瞭比較,結果錶明,前者的定位效果遠優于後者。
침대불균균지질조건하지진동신호전파속도차이조성정위정도교저적문제,통과장위치역적전파속도전환위시연역적등효전파속도,제출료일충기우시연-등효전파속도검색표적도체시간차(TDOA)목표정위방법。대등요직각삼각형전감기진렬적정위맹구진행료방진분석,위소제정위맹구,제출료오원십자진전감기포치방법;진행료장지시험,대운동차량진행목표정위,대기우시연-등효전파속도검색표적TDOA정위방법여고정전파속도TDOA정위방법적정위결과진행료비교,결과표명,전자적정위효과원우우후자。
In order to solve the problem of low seismic target localization accuracy due to propagation speed variation in anisotropic ground,a novel target localization method was proposed based on the time difference of arrival (TDOA ) from the time delay-equivalent propagation speed search table through transforming a position-related propagation speed into a time delay-related equivalent propagation speed. A simulation was carried out to investigate the localization ambiguity area with a right isosceles triangle sensor array. To eliminate this ambiguity area,a five-sensor cross array was put forward. A field experiment was conducted to locate a moving vehicle. The localization results based on the proposed method and the traditional TDOA based method assuming a constant propagation speed of seismic signal were compared with. The comparison result shows that compared with the traditional TDOA based method,the proposed method is much more efficient.