西安工程大学学报
西安工程大學學報
서안공정대학학보
JOURNAL OF XI'AN POLYTECHNIC UNIVERSITY
2015年
3期
336-340,345
,共6页
王亚茹%宋晓梅%何程%巩学芳
王亞茹%宋曉梅%何程%鞏學芳
왕아여%송효매%하정%공학방
无刷直流电机%PID控制%电流滞环
無刷直流電機%PID控製%電流滯環
무쇄직류전궤%PID공제%전류체배
BLDCM%PID control%hysteresis current
为了降低无刷直流电机(brushless DC motor ,BLDCM )的设计成本,节省设计时间,在Matlab/Simulink环境下,通过分析BLDCM 的控制原理及数学模型,进行BLDCM 控制系统的仿真研究。利用控制系统的模块化思想,分别建立独立的功能模块,再结合S函数,以此构建出BLDCM 控制系统的仿真模型。系统采用速度、电流的双闭环控制,在速度外环加入经典的PID控制以实现转速的平稳调节,电流内环控制采用滞环电流跟踪型PWM 实现。仿真结果表明,控制系统具有良好的静态、动态特性,同时验证了该方法的合理性和有效性。
為瞭降低無刷直流電機(brushless DC motor ,BLDCM )的設計成本,節省設計時間,在Matlab/Simulink環境下,通過分析BLDCM 的控製原理及數學模型,進行BLDCM 控製繫統的倣真研究。利用控製繫統的模塊化思想,分彆建立獨立的功能模塊,再結閤S函數,以此構建齣BLDCM 控製繫統的倣真模型。繫統採用速度、電流的雙閉環控製,在速度外環加入經典的PID控製以實現轉速的平穩調節,電流內環控製採用滯環電流跟蹤型PWM 實現。倣真結果錶明,控製繫統具有良好的靜態、動態特性,同時驗證瞭該方法的閤理性和有效性。
위료강저무쇄직류전궤(brushless DC motor ,BLDCM )적설계성본,절성설계시간,재Matlab/Simulink배경하,통과분석BLDCM 적공제원리급수학모형,진행BLDCM 공제계통적방진연구。이용공제계통적모괴화사상,분별건립독립적공능모괴,재결합S함수,이차구건출BLDCM 공제계통적방진모형。계통채용속도、전류적쌍폐배공제,재속도외배가입경전적PID공제이실현전속적평은조절,전류내배공제채용체배전류근종형PWM 실현。방진결과표명,공제계통구유량호적정태、동태특성,동시험증료해방법적합이성화유효성。
In order to reduce the design cost and save design time of brushless DC motor ,in Matlab/Simulink environment ,the control principle and the mathematical model of BLDCM are analyzed to conduct research related to control system .In the modular notion of control system ,by the combina‐tion of the isolated blocks and S‐function ,the model of BLDCM can be established .This system is con‐trolled by the speed and current double loop .Through a classical PID joined to the speed loop ,the ad‐justment of speed achieves smoothness .And a current controller is completed in the current loop on the principle of hysteresis current track PWM inverter .The simulation results prove that the system has good static and dynamic charactertics ,and verify the rationality and validity of this method .By studying the simulation model of BLDCM based on Matlab ,a new approach for designing and debug‐ging motors is provided .