环境技术
環境技術
배경기술
ENVIRONMENTAL TECHNOLOGY
2015年
3期
25-28,53
,共5页
于钱%臧卫国%杨晓宁%杨东升%院小雪%易忠%姜海富%周晶晶
于錢%臧衛國%楊曉寧%楊東升%院小雪%易忠%薑海富%週晶晶
우전%장위국%양효저%양동승%원소설%역충%강해부%주정정
真空%烘烤%电缆%出气%体电阻率
真空%烘烤%電纜%齣氣%體電阻率
진공%홍고%전람%출기%체전조솔
vacuum%baking%cable%outgassing%volume resistivity
目的:在于通过硅橡胶电缆护套材料真空出气性能研究,分析材料真空烘烤除气的参数。方法是依据真空中材料出气性能测试标准,测试电缆材料使用温度范围内,不同温度条件下材料的质量损失(TML)、收集的可凝挥发物量(CVCM),分析材料出气参数的变化。结果硅橡胶电缆材料出气温度85℃时,CVCM量值与75℃时基本相同,出气温度95℃时,CVCM量值是85℃时的4倍,且收集到的物质组分也明显增加;出气温度85℃条件下,24小时后材料的质量损失约占总质量损失的94%。结论通过材料出气性能实验方法,有效获得了硅橡胶电缆材料真空烘烤除气参数,体电阻率测试结果检验了真空烘烤除气参数的合理性。
目的:在于通過硅橡膠電纜護套材料真空齣氣性能研究,分析材料真空烘烤除氣的參數。方法是依據真空中材料齣氣性能測試標準,測試電纜材料使用溫度範圍內,不同溫度條件下材料的質量損失(TML)、收集的可凝揮髮物量(CVCM),分析材料齣氣參數的變化。結果硅橡膠電纜材料齣氣溫度85℃時,CVCM量值與75℃時基本相同,齣氣溫度95℃時,CVCM量值是85℃時的4倍,且收集到的物質組分也明顯增加;齣氣溫度85℃條件下,24小時後材料的質量損失約佔總質量損失的94%。結論通過材料齣氣性能實驗方法,有效穫得瞭硅橡膠電纜材料真空烘烤除氣參數,體電阻率測試結果檢驗瞭真空烘烤除氣參數的閤理性。
목적:재우통과규상효전람호투재료진공출기성능연구,분석재료진공홍고제기적삼수。방법시의거진공중재료출기성능측시표준,측시전람재료사용온도범위내,불동온도조건하재료적질량손실(TML)、수집적가응휘발물량(CVCM),분석재료출기삼수적변화。결과규상효전람재료출기온도85℃시,CVCM량치여75℃시기본상동,출기온도95℃시,CVCM량치시85℃시적4배,차수집도적물질조분야명현증가;출기온도85℃조건하,24소시후재료적질량손실약점총질량손실적94%。결론통과재료출기성능실험방법,유효획득료규상효전람재료진공홍고제기삼수,체전조솔측시결과검험료진공홍고제기삼수적합이성。
Through the study of the outgassing performance of silicone rubber cable in vacuum environment, it analyzes the baking parameter of silicone rubber cable. Methods According to the test standard of outgassing performance of material in vacuum environment, it tests the material total mass loss (TML) and collects the volatile condensable material (CVCM) in different temperature. Then it analyzes the change of outgassing parameter. Results The CVCM value in 85℃ is equal to the value in 75℃. And the CVCM value in 95℃ is four times of the value in 85℃. The component of the contamination increased clearly. Under the outgassing condition of 85℃/24h, the mass loss is about ninety-four percent of the TML. Conclusion It can get baking outgassing parameter with the outgassing performance test method. Volume resistivity test results verify the rationality of the vacuum baking parameter.