CAJ | 학술논문

在马弗式铅淬火连续炉对碳素弹簧钢丝热处理过程中，加热段温度的均匀性直接决定钢丝热处理的合格与否。采用铠装热电偶以及无纸温度记录仪等仪器对东北某钢厂的马弗式铅淬火连续炉的不同截面进行了测温试验，试验结果表明：整个炉腔的温度均匀性不足；控制室内控温电偶的温度已经不能够准确反映炉膛内的实际温度，炉温控制反馈系统需要改进。
재마불식연쉬화련속로대탄소탄황강사열처리과정중，가열단온도적균균성직접결정강사열처리적합격여부。채용개장열전우이급무지온도기록의등의기대동북모강엄적마불식연쉬화련속로적불동절면진행료측온시험，시험결과표명：정개로강적온도균균성불족；공제실내공온전우적온도이경불능구준학반영로당내적실제온도，로온공제반궤계통수요개진。
The most important factor in the heat treatment process of carbon spring steel wire which done in the muffle patenting continuous furnace is the furnace temperature homogeneity which depends on the properties of steel wire is ok or not. In this article the temperature measurement test on different cross sections of muffle patenting continuous furnace is done with sheathed thermocouple s and paperless temperature recorder. The results showed that the temperature homogeneity among the different cross sections is bad and the temperature error between control thermocouples which in the control room and measuring thermocouples which in the furnace is too big, the temperature control system must be improved.