涂料工业
塗料工業
도료공업
PAINT & COATINGS INDUSTRY
2015年
7期
63-67
,共5页
孟婷婷%吕正伟%姜金梅%杨亚萍%季永新
孟婷婷%呂正偉%薑金梅%楊亞萍%季永新
맹정정%려정위%강금매%양아평%계영신
阳离子乳液%复合乳化剂%耐水性%粒径
暘離子乳液%複閤乳化劑%耐水性%粒徑
양리자유액%복합유화제%내수성%립경
cationic emulsion%mixed surfactants%water resistance%particle size
将自制的高分子乳化剂与烷基溴化铵季铵盐型乳化剂配合使用,制备阳离子丙烯酸酯乳液,确定了高分子乳化剂与十六烷基三甲基溴化铵(CTAB)的最佳质量配比为19.6:0.6,由此得到的乳液粒径最小、稳定性最佳.并探讨了添加不同功能性单体对阳离子乳液的耐水性与粒径的影响,实验结果表明:加入功能单体三甘醇二甲基丙烯酸酯交联剂(V-389)时乳液的耐水性最好,当V-389用量为1.7%(占主单体总量)时,乳液的吸水率达到最小值3.62%,性能较优良.
將自製的高分子乳化劑與烷基溴化銨季銨鹽型乳化劑配閤使用,製備暘離子丙烯痠酯乳液,確定瞭高分子乳化劑與十六烷基三甲基溴化銨(CTAB)的最佳質量配比為19.6:0.6,由此得到的乳液粒徑最小、穩定性最佳.併探討瞭添加不同功能性單體對暘離子乳液的耐水性與粒徑的影響,實驗結果錶明:加入功能單體三甘醇二甲基丙烯痠酯交聯劑(V-389)時乳液的耐水性最好,噹V-389用量為1.7%(佔主單體總量)時,乳液的吸水率達到最小值3.62%,性能較優良.
장자제적고분자유화제여완기추화안계안염형유화제배합사용,제비양리자병희산지유액,학정료고분자유화제여십륙완기삼갑기추화안(CTAB)적최가질량배비위19.6:0.6,유차득도적유액립경최소、은정성최가.병탐토료첨가불동공능성단체대양리자유액적내수성여립경적영향,실험결과표명:가입공능단체삼감순이갑기병희산지교련제(V-389)시유액적내수성최호,당V-389용량위1.7%(점주단체총량)시,유액적흡수솔체도최소치3.62%,성능교우량.