CAJ | 학술논문

为了提高传感器测量准确度，开发了转矩转速传感器静态标定系统。该标定系统由转矩转速传感器、校正臂、砝码以及数据采集系统组成。根据力矩平衡原理，传感器一端固定，另一端由砝码通过校正臂给传感器加载。基于LabVIEW平台开发了数据采集系统，并根据传感器工作原理，开发了相位差及频率测量模块。以JC2 C型传感器为试验对象，进行了静态标定试验研究。试验结果表明，所开发的静态标定系统运行稳定、开发成本低，达到标定要求。
위료제고전감기측량준학도，개발료전구전속전감기정태표정계통。해표정계통유전구전속전감기、교정비、겁마이급수거채집계통조성。근거력구평형원리，전감기일단고정，령일단유겁마통과교정비급전감기가재。기우LabVIEW평태개발료수거채집계통，병근거전감기공작원리，개발료상위차급빈솔측량모괴。이JC2 C형전감기위시험대상，진행료정태표정시험연구。시험결과표명，소개발적정태표정계통운행은정、개발성본저，체도표정요구。
In order to improve the measurement accuracy of transducer, the static calibration system of torque-speed transducer has been developed. The calibration system is composed of torque speed transducer, correction arm, weights and data acquisition system. In accordance with the torque balance principle, the transducer is fixed at one end, and is loaded at another end by weights through correction arm. Based on LabVIEW development platform, the data acquisition system is developed, and in accordance with the operation principle of transducer,the phase difference and frequency measuring module is developed. With JC2C type transducer as the test object, the research on static calibration test is conducted. The test result shows that the static calibration system developed runs stably, and the development meets calibration requirements with low cost.