自动化仪表
自動化儀錶
자동화의표
PROCESS AUTOMATION INSTRUMENTATION
2015年
6期
79-83
,共5页
检波器测试仪%直接频率合成器%信号源%MSP430单片机%串行接口%失真度
檢波器測試儀%直接頻率閤成器%信號源%MSP430單片機%串行接口%失真度
검파기측시의%직접빈솔합성기%신호원%MSP430단편궤%천행접구%실진도
Geophone tester%Direct digital synthesizer(DDS)%Signal source%MSP430%SCM%Serial interface%Degree of distortion
为了解决传统测试仪信号源产生的交流激励信号频率控制不便、输出离散点多时频率范围受限的问题,并实现检波器各项性能参数的检测,研制了新型的检波器测试仪信号源。通过对测试仪信号源进行具体的分析,给出了详细电路图。信号源是由MSP430单片机和直接频率合成器( DDS)芯片AD9833构成的,通过串行接口编程设定。与现有的测试仪信号源相比,该信号源转换时间快,频率稳定度良好;周期离散点多;每周期输出4096个点时频率范围可达1~100 Hz以上;信号失真度可达到0.1%以下,能够满足检波器测试仪的激励信号要求。
為瞭解決傳統測試儀信號源產生的交流激勵信號頻率控製不便、輸齣離散點多時頻率範圍受限的問題,併實現檢波器各項性能參數的檢測,研製瞭新型的檢波器測試儀信號源。通過對測試儀信號源進行具體的分析,給齣瞭詳細電路圖。信號源是由MSP430單片機和直接頻率閤成器( DDS)芯片AD9833構成的,通過串行接口編程設定。與現有的測試儀信號源相比,該信號源轉換時間快,頻率穩定度良好;週期離散點多;每週期輸齣4096箇點時頻率範圍可達1~100 Hz以上;信號失真度可達到0.1%以下,能夠滿足檢波器測試儀的激勵信號要求。
위료해결전통측시의신호원산생적교류격려신호빈솔공제불편、수출리산점다시빈솔범위수한적문제,병실현검파기각항성능삼수적검측,연제료신형적검파기측시의신호원。통과대측시의신호원진행구체적분석,급출료상세전로도。신호원시유MSP430단편궤화직접빈솔합성기( DDS)심편AD9833구성적,통과천행접구편정설정。여현유적측시의신호원상비,해신호원전환시간쾌,빈솔은정도량호;주기리산점다;매주기수출4096개점시빈솔범위가체1~100 Hz이상;신호실진도가체도0.1%이하,능구만족검파기측시의적격려신호요구。
To solve the problems of traditional tester signal source, e. g. , the frequency of the AC excitation signal is difficult to be controlled, and frequency range is limited for more output discrete points, and to implement detection of various performance parameters for geophone, the new type of geophone tester signal source is researched and developed. Through specific analysis of tester signal source, detail circuit diagram is given. The signal source is composed of MSP430 single chip machine and direct digital synthesizer (DDS) chip AD9833, and is programming setup through serial interface. Comparing with existing tester signal source, this signal source features fast conversion, stable frequency and more cycle discrete points, when 4 096 points output in one cycle, the frequency range is up to 1~100 Hz; the signal distortion is less than 0. 1%;it can satisfy the requirement of excitation signal for geophone tester.