铸造
鑄造
주조
FOUNDRY
2015年
6期
559-562
,共4页
李青春%常国威%陈淑英%岳旭东
李青春%常國威%陳淑英%嶽旭東
리청춘%상국위%진숙영%악욱동
碳钢%凝固过程%δ-铁素体%原位观察
碳鋼%凝固過程%δ-鐵素體%原位觀察
탄강%응고과정%δ-철소체%원위관찰
carbon steel%solidification process%δ-ferrite%in-situ observation
以Fe-0.15 %C-0.8%Mn钢为研究对象,用激光共聚焦扫描显微镜原位观察了凝固过程中δ相的生长过程,并对δ相横断面形状的变化规律进行了研究.结果表明,在平均冷却速度为2℃·min-1的条件下,Fe-0.15%C-0.8%Mn合金凝固结束后δ相形成典型的蜂窝状组织.δ相径向生长时其半径随时间的变化规律不受周围钢液碳含量和过冷度的影响,均为开始时快速增大,而后增大幅度变慢.对于同一个δ相,随着半径与过冷度的增大,横断面形状稳定性下降,其形状呈由圆形逐渐变为椭圆形、类三边形、类四边形的变化规律.试验结果与理论预测结果基本吻合.
以Fe-0.15 %C-0.8%Mn鋼為研究對象,用激光共聚焦掃描顯微鏡原位觀察瞭凝固過程中δ相的生長過程,併對δ相橫斷麵形狀的變化規律進行瞭研究.結果錶明,在平均冷卻速度為2℃·min-1的條件下,Fe-0.15%C-0.8%Mn閤金凝固結束後δ相形成典型的蜂窩狀組織.δ相徑嚮生長時其半徑隨時間的變化規律不受週圍鋼液碳含量和過冷度的影響,均為開始時快速增大,而後增大幅度變慢.對于同一箇δ相,隨著半徑與過冷度的增大,橫斷麵形狀穩定性下降,其形狀呈由圓形逐漸變為橢圓形、類三邊形、類四邊形的變化規律.試驗結果與理論預測結果基本吻閤.
이Fe-0.15 %C-0.8%Mn강위연구대상,용격광공취초소묘현미경원위관찰료응고과정중δ상적생장과정,병대δ상횡단면형상적변화규률진행료연구.결과표명,재평균냉각속도위2℃·min-1적조건하,Fe-0.15%C-0.8%Mn합금응고결속후δ상형성전형적봉와상조직.δ상경향생장시기반경수시간적변화규률불수주위강액탄함량화과랭도적영향,균위개시시쾌속증대,이후증대폭도변만.대우동일개δ상,수착반경여과랭도적증대,횡단면형상은정성하강,기형상정유원형축점변위타원형、류삼변형、류사변형적변화규률.시험결과여이론예측결과기본문합.