价值工程
價值工程
개치공정
VALUE ENGINEERING
2015年
20期
77-80
,共4页
李祖兵%郑欣%孙伟%叶永进
李祖兵%鄭訢%孫偉%葉永進
리조병%정흔%손위%협영진
石炭系%识别方法%参数处理%逐步判别
石炭繫%識彆方法%參數處理%逐步判彆
석탄계%식별방법%삼수처리%축보판별
the carboniferous%recognition method%processing parameters%stepwise discrimination
碳酸盐岩储层岩性组成复杂,仅仅依靠少量的岩心、岩屑和几条常规的测井曲线资料很难准确地展现储层岩性的纵向及横向分布特征,从而影响对储层空间分布的预测。本文以上余家坝石炭系石炭系地层的岩心、岩屑录井资料为分析样本,结合对应的常规测井资料并对其进行数学处理,处理后共有12个参数供逐步判别函数筛选,经过多次的引入与剔除,建立了各类岩石的判别函数。其中灰岩、灰质云岩、云岩选择了9个参数;云质灰岩选择了10个参数。将岩性判别结果与取心井段的岩性对照,每类岩性的判别符合率都在85.39%以上,综合符合率为91.49%。说明本方法对目的层段碳酸盐岩储层岩性的识别是可行的。
碳痠鹽巖儲層巖性組成複雜,僅僅依靠少量的巖心、巖屑和幾條常規的測井麯線資料很難準確地展現儲層巖性的縱嚮及橫嚮分佈特徵,從而影響對儲層空間分佈的預測。本文以上餘傢壩石炭繫石炭繫地層的巖心、巖屑錄井資料為分析樣本,結閤對應的常規測井資料併對其進行數學處理,處理後共有12箇參數供逐步判彆函數篩選,經過多次的引入與剔除,建立瞭各類巖石的判彆函數。其中灰巖、灰質雲巖、雲巖選擇瞭9箇參數;雲質灰巖選擇瞭10箇參數。將巖性判彆結果與取心井段的巖性對照,每類巖性的判彆符閤率都在85.39%以上,綜閤符閤率為91.49%。說明本方法對目的層段碳痠鹽巖儲層巖性的識彆是可行的。
탄산염암저층암성조성복잡,부부의고소량적암심、암설화궤조상규적측정곡선자료흔난준학지전현저층암성적종향급횡향분포특정,종이영향대저층공간분포적예측。본문이상여가패석탄계석탄계지층적암심、암설록정자료위분석양본,결합대응적상규측정자료병대기진행수학처리,처리후공유12개삼수공축보판별함수사선,경과다차적인입여척제,건립료각류암석적판별함수。기중회암、회질운암、운암선택료9개삼수;운질회암선택료10개삼수。장암성판별결과여취심정단적암성대조,매류암성적판별부합솔도재85.39%이상,종합부합솔위91.49%。설명본방법대목적층단탄산염암저층암성적식별시가행적。
Carbonate reservoir lithology composition is complex, so only relying on a small number of rock cores, cuttings and several conventional log data is difficult to accurately show the vertical and horizontal distribution of reservoir lithology, thus affecting the forecast of reservoir space distribution. Taking the rock core and cutting logging data of Shangyujia dam carboniferous strata as the analysis sample, combined with the corresponding conventional logging data, this paper conducts the mathematical treatment. After the treatment, there are 12 parameters for stepwise discrimination function screening, and after multiple introduction and elimination, the discrimination function of various types of rocks is established. In which, limestone, gray dolomite, dolomite selected 9 parameters and dolomitic limestone selected 10 parameters. Through the comparison of the lithology discrimination results and cored interval, the coincidence rate of each type of lithology determination is above 85.39%, and the comprehensive coincidence rate is 91.49%, which shows that this method is feasible for the discrimination of carbonate reservoir lithology of the target layer.