金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2015年
3期
10-16,22
,共8页
何耿煌%吴冲浒%刘献礼%张守全%邹伶俐
何耿煌%吳遲滸%劉獻禮%張守全%鄒伶俐
하경황%오충호%류헌례%장수전%추령리
断续切削%硬质合金刀片%冲击破损%疲劳断裂%应力
斷續切削%硬質閤金刀片%遲擊破損%疲勞斷裂%應力
단속절삭%경질합금도편%충격파손%피로단렬%응력
intermittent cutting%cemented carbide insert%impact damage%fatigue fracture%stress
采用专用工件进行切削实验,借助三维受力分析仪和热成像仪分别采集机械和热冲击载荷,从而揭示刀片断裂行为产生的规律;通过电子显微镜观测刀片断口亚微观形貌特征,从而研究刀片破损失效机理;通过将切削速度和进给量进行区域性划分,明确硬质合金刀片安全切削的参数区域。研究数据可为硬质合金刀片的设计以及切削参数的选择提供方法、数据和理论支撑。
採用專用工件進行切削實驗,藉助三維受力分析儀和熱成像儀分彆採集機械和熱遲擊載荷,從而揭示刀片斷裂行為產生的規律;通過電子顯微鏡觀測刀片斷口亞微觀形貌特徵,從而研究刀片破損失效機理;通過將切削速度和進給量進行區域性劃分,明確硬質閤金刀片安全切削的參數區域。研究數據可為硬質閤金刀片的設計以及切削參數的選擇提供方法、數據和理論支撐。
채용전용공건진행절삭실험,차조삼유수력분석의화열성상의분별채집궤계화열충격재하,종이게시도편단렬행위산생적규률;통과전자현미경관측도편단구아미관형모특정,종이연구도편파손실효궤리;통과장절삭속도화진급량진행구역성화분,명학경질합금도편안전절삭적삼수구역。연구수거가위경질합금도편적설계이급절삭삼수적선택제공방법、수거화이론지탱。
The special work-piece was used for cutting test in this research?Mechanical and thermal shock loads were collected using 3D stress analyzer and thermal video system respectively to reveal the regularity of inserts'fracture behavior?Electron microscope was used to observe the micro-morphology of the inserts' fracture surface and the failure mechanism of inserts was studied?Finally,the divisions of both the cutting speed and the feed rate were made,and the parameter region of cutting safely for the inserts was defined?The results would provide the reference for method,data and theory to hard alloy inserts' design and the selection of cutting parameters.