交通节能与环保
交通節能與環保
교통절능여배보
MARINE ENERGY SAVING
2015年
3期
36-40
,共5页
刘英%吕振华%刘晓辉%王月岭
劉英%呂振華%劉曉輝%王月嶺
류영%려진화%류효휘%왕월령
节能环保%轻量化%有限元分析%洗扫车
節能環保%輕量化%有限元分析%洗掃車
절능배보%경양화%유한원분석%세소차
Eaving&Environment%light-weight%FEA%sweeper
针对水泵支架质量稍重,不利于节能环保的问题,首先利用三维软件Pro/E建立符合有限元分析的三维模型,然后导入有限元分析软件Workbench,进行结构分析和模态分析,得到分析结果;根据分析结果有针对性的对水泵支架进行轻量化改进,然后再导入有限元分析软件Workbench进行结构分析和模态分析,验证轻量化改进的结果;经过对比分析结果,轻量化改进前后性能基本没变化,但重量下降了20%,从而验证了轻量化改进的效果。结果证明:改变传统类比的方法,借助限元分析有针对性的轻量化改进是可行的。
針對水泵支架質量稍重,不利于節能環保的問題,首先利用三維軟件Pro/E建立符閤有限元分析的三維模型,然後導入有限元分析軟件Workbench,進行結構分析和模態分析,得到分析結果;根據分析結果有針對性的對水泵支架進行輕量化改進,然後再導入有限元分析軟件Workbench進行結構分析和模態分析,驗證輕量化改進的結果;經過對比分析結果,輕量化改進前後性能基本沒變化,但重量下降瞭20%,從而驗證瞭輕量化改進的效果。結果證明:改變傳統類比的方法,藉助限元分析有針對性的輕量化改進是可行的。
침대수빙지가질량초중,불리우절능배보적문제,수선이용삼유연건Pro/E건립부합유한원분석적삼유모형,연후도입유한원분석연건Workbench,진행결구분석화모태분석,득도분석결과;근거분석결과유침대성적대수빙지가진행경양화개진,연후재도입유한원분석연건Workbench진행결구분석화모태분석,험증경양화개진적결과;경과대비분석결과,경양화개진전후성능기본몰변화,단중량하강료20%,종이험증료경양화개진적효과。결과증명:개변전통류비적방법,차조한원분석유침대성적경양화개진시가행적。
As the weight of pump bracket about sweeper was bigger, and not meeting the requirements of Eaving&Environment,the three dimensional model meeting the FEA was accomplished by designing soft-ware Pro/E, was imported into the finite element analysis software Workbench. Then the structure analysis and mode analysis was carried out,and the analysis result was got. Then the light-weight improvement was carried out according to the analysis result about the pump bracket. Then the improved model was imported into the finite element analysis software Workbench,then the structure analysis and mode analysis was car-ried out again, and the result of the Light-weight improvement was verified. After Light-weight improve-ment ,the performance of the pump bracket didn't change according to the analysis result,but the weight of pump was reduced 20%,So the effect that the light-weight improvement was verified was good. Results show that light-weight improvement was feasible by the finite element analysis,then changing the tradition-al analogy method.