计量学报
計量學報
계량학보
ACTA METROLOGICA SINICA
2015年
4期
445-448
,共4页
计量学%橡胶老化性能%燃气%耐燃气性能%加速老化测试%使用时间%丁腈橡胶
計量學%橡膠老化性能%燃氣%耐燃氣性能%加速老化測試%使用時間%丁腈橡膠
계량학%상효노화성능%연기%내연기성능%가속노화측시%사용시간%정정상효
Metrology%Rubber aging performance%Town gas%Resistant to gas performance%Accelerated aging test%Service time%NBR
基于烘箱热空气老化试验方法,建立了一种能让试验样品处于流通气氛冲刷的闭合试验装置,对橡胶材料进行燃气环境中老化性能测试。选用丁腈橡胶为试样,测试其在不同温度、不同气氛下的老化性能,预测其使用时间。测试结果显示,采用空气气氛方法进行丁腈橡胶加速老化试验,预测的使用时间结果与实际使用时间的偏差在80%以上;燃气气氛冲刷环境下,丁腈橡胶在老化速率是热空气老化的2倍左右,且燃气气氛下的加速老化使用时间的预测结果与实际的偏差在±20%之内。
基于烘箱熱空氣老化試驗方法,建立瞭一種能讓試驗樣品處于流通氣氛遲刷的閉閤試驗裝置,對橡膠材料進行燃氣環境中老化性能測試。選用丁腈橡膠為試樣,測試其在不同溫度、不同氣氛下的老化性能,預測其使用時間。測試結果顯示,採用空氣氣氛方法進行丁腈橡膠加速老化試驗,預測的使用時間結果與實際使用時間的偏差在80%以上;燃氣氣氛遲刷環境下,丁腈橡膠在老化速率是熱空氣老化的2倍左右,且燃氣氣氛下的加速老化使用時間的預測結果與實際的偏差在±20%之內。
기우홍상열공기노화시험방법,건립료일충능양시험양품처우류통기분충쇄적폐합시험장치,대상효재료진행연기배경중노화성능측시。선용정정상효위시양,측시기재불동온도、불동기분하적노화성능,예측기사용시간。측시결과현시,채용공기기분방법진행정정상효가속노화시험,예측적사용시간결과여실제사용시간적편차재80%이상;연기기분충쇄배경하,정정상효재노화속솔시열공기노화적2배좌우,차연기기분하적가속노화사용시간적예측결과여실제적편차재±20%지내。
Based on the hot air aging test methods,a device is created to test the aging performance of rubber,which has the ability to flush test samples in the circulation of atmosphere. The NBR is used as sample to test its aging performance under different temperature and atmosphere,and predict its use of time. The results show that when accelerated aging test under air atmosphere,the deviation of the predict results and actual use time is above 80% ,the aging rate of NBR under gas environment is 1 ~ 2 times that of hot air,and when accelerated aging test undergas atmosphere,comparing the predict results and actual use time,the deviation is under 20%.