化学工程师
化學工程師
화학공정사
CHEMICAL ENGINEER
2015年
6期
83-86
,共4页
栾玉娜%杨庆鸿%任春燕%王越%王梓桐%张荣明
欒玉娜%楊慶鴻%任春燕%王越%王梓桐%張榮明
란옥나%양경홍%임춘연%왕월%왕재동%장영명
乳化剂%粘土沥青乳化体系%封堵地层
乳化劑%粘土瀝青乳化體繫%封堵地層
유화제%점토력청유화체계%봉도지층
emulsifier%composite system of clay and asphalt%plugging formation
以C12-18叔胺与氯化亚砜为主要原料,合成了一系列长链烷基(2-亚硫酸)乙基二甲基铵(DMA12,DMA14,DMA16,DMA18)乳化剂,并对产品结构进行了红外光谱表征.对DMA的接触角、发泡性能及其与沥青间的界面张力进行了评价.通过休止角测定,确定了粘土与沥青的质量比,选择性能最佳的乳化剂,制备粘土沥青乳化体系,加入聚乙二醇悬浮剂,调整体系黏度,制备粘土沥青复合悬浮体系.结果表明,n=0.002mol· L-1的十八烷基(2-亚硫酸)乙基二甲基铵界面张力最低,为0.079mN·m-1,起泡比达到200%,接触角为108.19°.当m(牯土)∶m(沥青)=4.5∶1时,休止角为29.33°,二者混合最均匀,最优制备体系条件为:质量比m(粘土/沥青)∶m(DMA18)∶m(悬浮剂)=100∶4∶1,所制备的乳化悬浮体系7天后仍没有出现出水现象,比较稳定,适用于封堵地层.
以C12-18叔胺與氯化亞砜為主要原料,閤成瞭一繫列長鏈烷基(2-亞硫痠)乙基二甲基銨(DMA12,DMA14,DMA16,DMA18)乳化劑,併對產品結構進行瞭紅外光譜錶徵.對DMA的接觸角、髮泡性能及其與瀝青間的界麵張力進行瞭評價.通過休止角測定,確定瞭粘土與瀝青的質量比,選擇性能最佳的乳化劑,製備粘土瀝青乳化體繫,加入聚乙二醇懸浮劑,調整體繫黏度,製備粘土瀝青複閤懸浮體繫.結果錶明,n=0.002mol· L-1的十八烷基(2-亞硫痠)乙基二甲基銨界麵張力最低,為0.079mN·m-1,起泡比達到200%,接觸角為108.19°.噹m(牯土)∶m(瀝青)=4.5∶1時,休止角為29.33°,二者混閤最均勻,最優製備體繫條件為:質量比m(粘土/瀝青)∶m(DMA18)∶m(懸浮劑)=100∶4∶1,所製備的乳化懸浮體繫7天後仍沒有齣現齣水現象,比較穩定,適用于封堵地層.
이C12-18숙알여록화아풍위주요원료,합성료일계렬장련완기(2-아류산)을기이갑기안(DMA12,DMA14,DMA16,DMA18)유화제,병대산품결구진행료홍외광보표정.대DMA적접촉각、발포성능급기여력청간적계면장력진행료평개.통과휴지각측정,학정료점토여력청적질량비,선택성능최가적유화제,제비점토력청유화체계,가입취을이순현부제,조정체계점도,제비점토력청복합현부체계.결과표명,n=0.002mol· L-1적십팔완기(2-아류산)을기이갑기안계면장력최저,위0.079mN·m-1,기포비체도200%,접촉각위108.19°.당m(고토)∶m(력청)=4.5∶1시,휴지각위29.33°,이자혼합최균균,최우제비체계조건위:질량비m(점토/력청)∶m(DMA18)∶m(현부제)=100∶4∶1,소제비적유화현부체계7천후잉몰유출현출수현상,비교은정,괄용우봉도지층.