华南理工大学学报(自然科学版)
華南理工大學學報(自然科學版)
화남리공대학학보(자연과학판)
JOURNAL OF SOUTH CHINA UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION)
2015年
4期
78-84,94
,共8页
永磁同步电机%无传感器控制%分数阶%滑模观测器
永磁同步電機%無傳感器控製%分數階%滑模觀測器
영자동보전궤%무전감기공제%분수계%활모관측기
permanent magnet synchronous motor%sensorless control%fractional order%sliding mode observer
针对永磁同步电机无位置传感器控制系统中存在的低速或零速下控制精度较低的问题,提出他控启动与自控运行的分段控制策略。一方面,当系统处于他控启动阶段时,通过向电机定子绕组输入稳定变化的旋转磁场使电机得以平滑启动或停机;另一方面,当系统处于自控运行阶段时,引入分数阶滑模观测器与分数阶模型的思想,以确保无位置传感器控制系统能实现控制方式间的平滑切换。通过仿真和实验给出了分数阶滑模观测器与整数阶滑模观测器分别作用于无位置传感器控制系统中的响应特性曲线。结果表明,文中提出的算法不但能实现电机的平滑启动,而且能有效地消减控制方式切换过程中所产生的抖振,达到较高的综合控制性能。
針對永磁同步電機無位置傳感器控製繫統中存在的低速或零速下控製精度較低的問題,提齣他控啟動與自控運行的分段控製策略。一方麵,噹繫統處于他控啟動階段時,通過嚮電機定子繞組輸入穩定變化的鏇轉磁場使電機得以平滑啟動或停機;另一方麵,噹繫統處于自控運行階段時,引入分數階滑模觀測器與分數階模型的思想,以確保無位置傳感器控製繫統能實現控製方式間的平滑切換。通過倣真和實驗給齣瞭分數階滑模觀測器與整數階滑模觀測器分彆作用于無位置傳感器控製繫統中的響應特性麯線。結果錶明,文中提齣的算法不但能實現電機的平滑啟動,而且能有效地消減控製方式切換過程中所產生的抖振,達到較高的綜閤控製性能。
침대영자동보전궤무위치전감기공제계통중존재적저속혹령속하공제정도교저적문제,제출타공계동여자공운행적분단공제책략。일방면,당계통처우타공계동계단시,통과향전궤정자요조수입은정변화적선전자장사전궤득이평활계동혹정궤;령일방면,당계통처우자공운행계단시,인입분수계활모관측기여분수계모형적사상,이학보무위치전감기공제계통능실현공제방식간적평활절환。통과방진화실험급출료분수계활모관측기여정수계활모관측기분별작용우무위치전감기공제계통중적향응특성곡선。결과표명,문중제출적산법불단능실현전궤적평활계동,이차능유효지소감공제방식절환과정중소산생적두진,체도교고적종합공제성능。
As the control system without position sensors for the permanent magnet synchronous motor is of low con-trol accuracy at low or zero speed, a subsection control strategy with both the separately-controlled startup and the self-controlledoperation is proposed.In this strategy, when the system is in the separately-controlled startup stage, the machine can be started or stopped smoothly by injecting a stable rotating magnetic field into stator windings. However, when the system is in the self-controlled operation stage, a fractional-order sliding mode observer and a fractional-order model areboth introduced to ensure the smooth transition between the two control stages in the sen-sorlesscontrol system.Then, the response curves of the sensorlesscontrol system respectively with fractional-order sliding mode observerand integral-order sliding mode observer are obtained via simulation and experiments.The re-sults show that the proposed algorithm not only implements smooth startup of the machine but also effectively re-duces the chattering in the switching process.Thus, a higher integrated control performance is achieved.