红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2015年
7期
2127-2131
,共5页
激光功率稳定器%光谱响应度%中红外激光器%声光调制器%布拉格衍射%红外探测器
激光功率穩定器%光譜響應度%中紅外激光器%聲光調製器%佈拉格衍射%紅外探測器
격광공솔은정기%광보향응도%중홍외격광기%성광조제기%포랍격연사%홍외탐측기
laser power stabilizer%spectral responsivity%mid infrared laser%acousto-optic modulator%Bragg diffraction%infrared detector
针对中红外光电探测器光谱响应度精确测量时,要求提高中红外激光器功率稳定度这一问题。提出了一种对中红外激光器功率进行稳幅的方法,基于声光调制器布拉格衍射原理、采用光反馈闭环控制技术实现了对中红外激器光功率的稳定控制。详细介绍了该方案的光路设计、控制电路原理及控制算法,在此基础上研制了一种中红外激光功率稳定器。采用该功率稳定器对3.39μm He-Ne激光器的输出光进行了稳幅实验。结果表明,该装置可将中红外激光器输出功率稳定度从8%提高到0.4%。可很好地满足中红外探测器光谱响应度测试的需要。
針對中紅外光電探測器光譜響應度精確測量時,要求提高中紅外激光器功率穩定度這一問題。提齣瞭一種對中紅外激光器功率進行穩幅的方法,基于聲光調製器佈拉格衍射原理、採用光反饋閉環控製技術實現瞭對中紅外激器光功率的穩定控製。詳細介紹瞭該方案的光路設計、控製電路原理及控製算法,在此基礎上研製瞭一種中紅外激光功率穩定器。採用該功率穩定器對3.39μm He-Ne激光器的輸齣光進行瞭穩幅實驗。結果錶明,該裝置可將中紅外激光器輸齣功率穩定度從8%提高到0.4%。可很好地滿足中紅外探測器光譜響應度測試的需要。
침대중홍외광전탐측기광보향응도정학측량시,요구제고중홍외격광기공솔은정도저일문제。제출료일충대중홍외격광기공솔진행은폭적방법,기우성광조제기포랍격연사원리、채용광반궤폐배공제기술실현료대중홍외격기광공솔적은정공제。상세개소료해방안적광로설계、공제전로원리급공제산법,재차기출상연제료일충중홍외격광공솔은정기。채용해공솔은정기대3.39μm He-Ne격광기적수출광진행료은폭실험。결과표명,해장치가장중홍외격광기수출공솔은정도종8%제고도0.4%。가흔호지만족중홍외탐측기광보향응도측시적수요。
In order to accurately measure spectral response rate of mid infrared photoelectric detectors, the power stability of mid infrared laser must be improved. A novel method of stabilizing laser power was proposed using the technique of light feedback based on Bragg diffraction principle of the acousto-optic modulator in this paper. The optical path design, control electrocircuit and arithmetic were discussed particularly, on this basis, a mid infrared laser power stabilizers was fabricated. Using this power stabilizers, the power stability of He-Ne laser at a wavelength of 3.39 μm was compared. The experimental result shows that this method can improve the power stability of the infrared laser from 8%to 0.4%, and meet spectral responsivity of the infrared detector parameters.