CAJ | 학술논문

基于灰色关联度分析法研究微铣削工艺系统各因素对被加工零件毛刺产生的影响规律，通过建立毛刺产生的故障树模型，将毛刺产生定义为顶事件，影响毛刺产生的因素定义为底事件，导致顶事件发生的充分且必要的底事件集合定义为最小割集。建立了典型故障特征矩阵和待检模式向量，计算出了最小割集和顶事件的发生概率、各底事件的重要度以及各最小割集的关联度。对关联度较大的前三个最小割集进行了微铣削加工实验验证，实验结果与灰色关联度分析法的计算结果相吻合，灰色关联度分析法为微铣削毛刺的预测及控制提供了一种有效方法。
기우회색관련도분석법연구미선삭공예계통각인소대피가공령건모자산생적영향규률，통과건립모자산생적고장수모형，장모자산생정의위정사건，영향모자산생적인소정의위저사건，도치정사건발생적충분차필요적저사건집합정의위최소할집。건립료전형고장특정구진화대검모식향량，계산출료최소할집화정사건적발생개솔、각저사건적중요도이급각최소할집적관련도。대관련도교대적전삼개최소할집진행료미선삭가공실험험증，실험결과여회색관련도분석법적계산결과상문합，회색관련도분석법위미선삭모자적예측급공제제공료일충유효방법。
The influences of process factors on the burr generation of part machined were studied based on the grey correlation analysis method.Fault tree model of burr generation was set up.Burr generation was defined as top event and the factors influencing burr generation were defined as basic events.The sufficient and necessary basic events sets that led to top event occurrence were defined as minimal cut sets.The characteristic matrix and pattern vectors of typical faults were set up to calcuG late the generation rate of minimal cut sets and top event,importance of basic events and the correlaG tion values of minimal cut sets separately.Micro milling experiments were carried out to verify the three minimal cut sets whose correlation values were No.1 ~ No.3.The experimental results are in conformity with the grey correlation calculation ones.Therefore,the grey correlation analysis method provides an effective method to predict and control micro milling burr.