中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2015年
14期
1983-1986
,共4页
付宇明%刘明%郭建龙%郑丽娟
付宇明%劉明%郭建龍%鄭麗娟
부우명%류명%곽건룡%정려연
金刚石结块%磁处理%冲击韧性%显微组织%数值模拟
金剛石結塊%磁處理%遲擊韌性%顯微組織%數值模擬
금강석결괴%자처리%충격인성%현미조직%수치모의
diamond segment%magnetic treatment%impact toughness%microstructure%numerical simulation
采用热压烧结方法制备金刚石结块,对金刚石结块进行脉冲磁处理。分别对经脉冲磁处理和未经磁处理的金刚石结块进行冲击韧性实验,检测经脉冲磁处理和未经磁处理的金刚石结块的冲击功,观察金刚石结块在冲击实验后的断口显微组织。对脉冲磁处理的磁场进行瞬态磁场数值模拟。实验结果表明,经脉冲磁处理后的金刚石结块冲击韧性平均提高35.4%,断口晶粒间隙明显减小。数值模拟结果说明,金刚石结块侧边缘磁场强度较大,磁场应力集中,周期变化的磁场应力会引发磁致振荡效应。实验和数值模拟结果表明,脉冲磁处理可以改善金刚石结块性能。
採用熱壓燒結方法製備金剛石結塊,對金剛石結塊進行脈遲磁處理。分彆對經脈遲磁處理和未經磁處理的金剛石結塊進行遲擊韌性實驗,檢測經脈遲磁處理和未經磁處理的金剛石結塊的遲擊功,觀察金剛石結塊在遲擊實驗後的斷口顯微組織。對脈遲磁處理的磁場進行瞬態磁場數值模擬。實驗結果錶明,經脈遲磁處理後的金剛石結塊遲擊韌性平均提高35.4%,斷口晶粒間隙明顯減小。數值模擬結果說明,金剛石結塊側邊緣磁場彊度較大,磁場應力集中,週期變化的磁場應力會引髮磁緻振盪效應。實驗和數值模擬結果錶明,脈遲磁處理可以改善金剛石結塊性能。
채용열압소결방법제비금강석결괴,대금강석결괴진행맥충자처리。분별대경맥충자처리화미경자처리적금강석결괴진행충격인성실험,검측경맥충자처리화미경자처리적금강석결괴적충격공,관찰금강석결괴재충격실험후적단구현미조직。대맥충자처리적자장진행순태자장수치모의。실험결과표명,경맥충자처리후적금강석결괴충격인성평균제고35.4%,단구정립간극명현감소。수치모의결과설명,금강석결괴측변연자장강도교대,자장응력집중,주기변화적자장응력회인발자치진탕효응。실험화수치모의결과표명,맥충자처리가이개선금강석결괴성능。
Diamond segments were made by hot-pressed sintering technology and treated by alternating magnetic field.The impact energy of diamond segments were investigated by impact tough-ness test,which were treated with pulsed magnetic treatment and not treated.And the numerical sim-ulation was made for the transient magnetic field.The microstructures of diamond segments both be-fore and after the magnetic experiment were observed.The experimental results indicate that the im-pact toughness of diamond segments is improved on average about 35.4% and the crystalline grain gap become more uniformity after magnetized.The numerical analysis results reveal that the intensity of magnetic field and the magnetic force in the edge of diamond segment is concentrated,the magnetic vi-bration due to alternating magnetic force is in favor of magnetic shock effect.It provides intuitionistic evidences for that the alternating magnetic treatment can be used as one kind of effective technique to improve the material performance of diamond segments.