CAJ | 학술논문

针对目前含有岛屿或空洞的复杂曲面上机器人喷涂路径规划中存在的问题，提出一种能够保持轮廓平行的机器人喷涂路径设计方法。利用最小二乘坐标映射原理，将被喷涂曲面映射到二维平面域，建立目标曲面与二维平面域之间的一一映射关系，然后对平面映射域的内外边界进行连续偏置，构造能够保持轮廓平行的二维偏置曲线；进而以被喷涂曲面到二维平面域的坐标映射为向导，将无干涉二维偏置曲线逆映射到被喷涂曲面上，生成能够保持轮廓平行的喷涂路径，实现多岛屿或空洞复杂曲面上三维喷绘路径设计到二维平面的降维处理。实例仿真实验结果表明，所提方法简单实用，可在含有岛屿或空洞的复杂曲面上快速地生成能够保持轮廓平行的机器人喷涂路径。
침대목전함유도서혹공동적복잡곡면상궤기인분도로경규화중존재적문제，제출일충능구보지륜곽평행적궤기인분도로경설계방법。이용최소이승좌표영사원리，장피분도곡면영사도이유평면역，건립목표곡면여이유평면역지간적일일영사관계，연후대평면영사역적내외변계진행련속편치，구조능구보지륜곽평행적이유편치곡선；진이이피분도곡면도이유평면역적좌표영사위향도，장무간섭이유편치곡선역영사도피분도곡면상，생성능구보지륜곽평행적분도로경，실현다도서혹공동복잡곡면상삼유분회로경설계도이유평면적강유처리。실례방진실험결과표명，소제방법간단실용，가재함유도서혹공동적복잡곡면상쾌속지생성능구보지륜곽평행적궤기인분도로경。
A method for generating robot spraying paths on complex surface with islands was pro-posed by using the coordinate mapping theory which was used to flatten the sprayed surface onto a plane.On this plane,the spray points were calculated by iteratively offsetting the inner and outer boundaries of the planar surface.Then,using the mapping from the sprayed surface to the planar re-gion as a guide,the planar offset curves without self-intersections were mapped onto the sprayed sur-face inversely,thus forming the resulting contour-parallel spraying paths.Benefiting the mapping of the sprayed surface to the planar region,the task of generating the spaying paths was simplified from is reduced from 3D surface to 2D plane,geometric computations related to spraying path generation were considerably reduced,especially for self-intersection elimination of offset path.Finally,the pro-posed method was tested on several sample surfaces and is shown that it can generate contour-parallel spraying paths for complex surfaces nicely,especially for those with holes or islands.