CAJ | 학술논문

利用 PCS 和 Be(acac)2合成了一系列含铍聚碳硅烷(PBeCS),通过 FT-IR、NMR、GPC、XPS 等检测方法考察了 Be 含量、反应温度、反应时间对PBeCS 的影响.结果显示,PCS 和 Be(acac)2的反应主要通过消耗 PCS 的 Si—H 键来完成；PBeCS 从Be(acac)2中引入了烯醇式结构：CH 3 CO CH??C O；在270℃左右,Be 含量小于0．8％(质量分数)时,PBeCS 的分子量随着 Be 含量的增加而增大,分布变宽,但 Be 含量在0．8％~1．0％(质量分数)之间时,PBeCS 的分子量随着 Be 含量的增加而迅速减少,分布变窄；提高反应温度、延长反应时间可以使 PBeCS 的分子量增大,分布变宽；PBeCS 的 C 元素和 O 元素的含量的增加来自Be(acac)2.
이용 PCS 화 Be(acac)2합성료일계렬함피취탄규완(PBeCS),통과 FT-IR、NMR、GPC、XPS 등검측방법고찰료 Be 함량、반응온도、반응시간대PBeCS 적영향.결과현시,PCS 화 Be(acac)2적반응주요통과소모 PCS 적 Si—H 건래완성；PBeCS 종Be(acac)2중인입료희순식결구：CH 3 CO CH??C O；재270℃좌우,Be 함량소우0．8％(질량분수)시,PBeCS 적분자량수착 Be 함량적증가이증대,분포변관,단 Be 함량재0．8％~1．0％(질량분수)지간시,PBeCS 적분자량수착 Be 함량적증가이신속감소,분포변착；제고반응온도、연장반응시간가이사 PBeCS 적분자량증대,분포변관；PBeCS 적 C 원소화 O 원소적함량적증가래자Be(acac)2.
The precursors of polyberylliumcarbosilane (PBeCS)were prepared by the reaction of polycarbosi-lanes (PCS)and beryllium acetylacetonate [Be(acac)2 ].The influence of beryllium content,reaction tempera-ture and reaction time to the precursors was measured by FT-IR,NMR,GPC,XPS et al.The results shown that the completion of the reaction of PCS and Be(acac)2 was based on the consumption of Si—H bonds,and the precursors had a the enol form structure CH 3 CO CH??C O imported by Be(acac)2 ,and the molecular weight and polydispersity of PBeCS were increased after increasing beryllium content while the content less than 0.8wt%,but decreased at a high speed while its content was 0.8-1.00wt% at about 270 ℃,and the molecular weight and polydispersity of PBeCS were also increased while increasing the reaction temperature and the reac-tion time,and the increasing of carbon and oxygen content in the PBeCS was introduced from Be(acac)2 .