金属矿山
金屬礦山
금속광산
METAL MINE
2015年
7期
143-146
,共4页
下向进路%无分段充填开采%辅助通风装置%通风方法
下嚮進路%無分段充填開採%輔助通風裝置%通風方法
하향진로%무분단충전개채%보조통풍장치%통풍방법
Downward drift%Back-fill mining without sublevel%Auxiliary ventilation device%Ventilation method
针对某金矿现场采用的下向进路分层无分段充填采矿法通风系统所存在的问题,对原有通风系统进行了技术改造,研发了一种新型的“充填回风井封堵板加可伸缩刚性风筒”辅助通风装置,并在1111#采场进行了工业性试验。结果表明:通风系统改造后,每个作业循环除尘时间缩短了0.9 h,节约新鲜风3299.4 m3;解决了下向进路分层无分段充填采矿过程中存在的工作面新、污风混杂,通风效果差等问题,提高了采场工作效率。该研究成果可为类似条件下的金属矿山通风系统改造提供借鉴。
針對某金礦現場採用的下嚮進路分層無分段充填採礦法通風繫統所存在的問題,對原有通風繫統進行瞭技術改造,研髮瞭一種新型的“充填迴風井封堵闆加可伸縮剛性風筒”輔助通風裝置,併在1111#採場進行瞭工業性試驗。結果錶明:通風繫統改造後,每箇作業循環除塵時間縮短瞭0.9 h,節約新鮮風3299.4 m3;解決瞭下嚮進路分層無分段充填採礦過程中存在的工作麵新、汙風混雜,通風效果差等問題,提高瞭採場工作效率。該研究成果可為類似條件下的金屬礦山通風繫統改造提供藉鑒。
침대모금광현장채용적하향진로분층무분단충전채광법통풍계통소존재적문제,대원유통풍계통진행료기술개조,연발료일충신형적“충전회풍정봉도판가가신축강성풍통”보조통풍장치,병재1111#채장진행료공업성시험。결과표명:통풍계통개조후,매개작업순배제진시간축단료0.9 h,절약신선풍3299.4 m3;해결료하향진로분층무분단충전채광과정중존재적공작면신、오풍혼잡,통풍효과차등문제,제고료채장공작효솔。해연구성과가위유사조건하적금속광산통풍계통개조제공차감。
According to the existing problems of ventilation system of slicing and back-fill mining without sub-level in downward drift in a certain gold mine,the original ventilation system is modified. A new type of“back-fill return air shaft plug-ging plate with expansible rigid fan tube” auxiliary ventilation device is researched and developed,and then is applied into 1111# stope for the industrial tests. The results show that:after the ventilation system improved,the time of dust removal at each operation cycle is shortened to 0. 9 h,and 32 99. 4 m3 of fresh air can be saved. The problems in the process of back-fill mining without sub-level in downward drift layer are solved,such as the confounding of fresh and dirty air in the working face,and the poor ventilation effect,and the working efficiency of the stope is improved. The research results could provide theoretical guid-ance for improving the ventilation system of the metal mines under the similar condition.