CAJ | 학술논문

云锡个旧卡房公司铜硫浮选尾矿锡品位为0．35%，主要含锡矿物锡石不仅嵌布粒度微细，与脉石矿物嵌布关系紧密，而且可浮性或密度也与脉石矿物较接近，导致现场的单一重选工艺仅能获得锡品位为6%左右、锡回收率为50%左右的锡精矿。为高效回收该尾矿中的锡资源，采用浮选—重选工艺进行了选矿试验。结果表明：通过1粗2精2扫闭路浮选，可获得锡品位为8．26%、锡回收率为83．51%的浮选锡精矿；浮选锡精矿通过1次摇床重选，可获得锡品位为40．70%、回收率为68．95%的重选精矿，以及锡品位为1．72%、回收率为14．56%的重选尾矿，该重选尾矿可作为烟化工艺回收锡的原料。因此，试验确定的工艺流程是该尾矿的高效选锡流程。
운석개구잡방공사동류부선미광석품위위0．35%，주요함석광물석석불부감포립도미세，여맥석광물감포관계긴밀，이차가부성혹밀도야여맥석광물교접근，도치현장적단일중선공예부능획득석품위위6%좌우、석회수솔위50%좌우적석정광。위고효회수해미광중적석자원，채용부선—중선공예진행료선광시험。결과표명：통과1조2정2소폐로부선，가획득석품위위8．26%、석회수솔위83．51%적부선석정광；부선석정광통과1차요상중선，가획득석품위위40．70%、회수솔위68．95%적중선정광，이급석품위위1．72%、회수솔위14．56%적중선미광，해중선미광가작위연화공예회수석적원료。인차，시험학정적공예류정시해미광적고효선석류정。
Tin grade of copper-sulfide flotation tailings from Kafang Company in Gejiu County,Yunxi,is 0. 35%. Cassit-erite,the main tin bearing mineral,is micro-fine disseminated and closely disseminated with gangue minerals which have close-ly floatability and density with cassiterite. Therefore,tin concentrate of flotation assaying about 6% tin and recovery of about 50% was obtained through the single gravity separation process,In order to efficiently recover tin resources from the tailings, the flotation-gravity separation process was used for dressing experiment. Results showed that through the process of one roug-hing,two cleanings,two scavenge closed circuit flotation process tin concentrate with 8. 26% tin and recovery of 83. 51% was obtained. Gravity concentrate with 40. 70% tin and recovery of 68. 95% was obtained by once shaking table gravity separation dealing with flotation tin concentrate,as well as gravity tailings with 1. 72% tin and recovery of 14. 56%. The tailings of gravity separation can be used as raw material for tin recover via fuming process. Therefore,the technological process is a high efficient process to recover tin from tailings.