金属矿山
金屬礦山
금속광산
METAL MINE
2015年
7期
69-72
,共4页
李艳军%郭旺%吕良%张淑敏
李豔軍%郭旺%呂良%張淑敏
리염군%곽왕%려량%장숙민
铅锌矿%伴生银%方铅矿%闪锌矿%粗精矿再磨再选
鉛鋅礦%伴生銀%方鉛礦%閃鋅礦%粗精礦再磨再選
연자광%반생은%방연광%섬자광%조정광재마재선
Lead-zinc ore%Associated silver%Galena%Sphalerite%Regrinding and recleaning of coarse concentrate
内蒙古某铅锌矿石铅、锌品位分别为1.62%、5.98%,伴生银品位为19.60 g/t,主要铅锌矿物方铅矿、闪锌矿嵌布粒度均较粗。为确定该矿石的开发利用工艺流程,进行了选矿试验研究。结果表明,在磨矿细度为-0.074 mm占75%的情况下,采用1粗2扫—粗精矿再磨后2次精选选铅、选铅尾矿1粗4精2扫选锌,中矿顺序返回流程处理该矿石,最终可获得铅品位为56.65%、铅回收率为83.85%、含银536.55 g/t、银回收率为65.70%的铅精矿,以及锌品位为47.74%、锌回收率为90.61%、含银44.66 g/t、银回收率为25.86%的锌精矿。试验确定的工艺流程可作为该矿石的合理开发利用流程。
內矇古某鉛鋅礦石鉛、鋅品位分彆為1.62%、5.98%,伴生銀品位為19.60 g/t,主要鉛鋅礦物方鉛礦、閃鋅礦嵌佈粒度均較粗。為確定該礦石的開髮利用工藝流程,進行瞭選礦試驗研究。結果錶明,在磨礦細度為-0.074 mm佔75%的情況下,採用1粗2掃—粗精礦再磨後2次精選選鉛、選鉛尾礦1粗4精2掃選鋅,中礦順序返迴流程處理該礦石,最終可穫得鉛品位為56.65%、鉛迴收率為83.85%、含銀536.55 g/t、銀迴收率為65.70%的鉛精礦,以及鋅品位為47.74%、鋅迴收率為90.61%、含銀44.66 g/t、銀迴收率為25.86%的鋅精礦。試驗確定的工藝流程可作為該礦石的閤理開髮利用流程。
내몽고모연자광석연、자품위분별위1.62%、5.98%,반생은품위위19.60 g/t,주요연자광물방연광、섬자광감포립도균교조。위학정해광석적개발이용공예류정,진행료선광시험연구。결과표명,재마광세도위-0.074 mm점75%적정황하,채용1조2소—조정광재마후2차정선선연、선연미광1조4정2소선자,중광순서반회류정처리해광석,최종가획득연품위위56.65%、연회수솔위83.85%、함은536.55 g/t、은회수솔위65.70%적연정광,이급자품위위47.74%、자회수솔위90.61%、함은44.66 g/t、은회수솔위25.86%적자정광。시험학정적공예류정가작위해광석적합리개발이용류정。
A lead-zinc ore in Inner Mongolia with zinc of 1. 62%,and lead of 5. 98%,contains associated silver grade is 19. 60 g/t,in which main galena,sphalerite are coarsely disseminated. In order to realize the high efficient exploitation and uti-lization of the resources, beneficiation tests of the ore were made. Results showed that under the grinding fineness of 75%-0. 074 mm,lead concentrate with lead grade of 56. 65% and lead recovery of 83. 85%,silver grade of 536. 55 g/t and silver recovery of 65. 70%,and zinc concentrate with zinc grade of 47. 74%,zinc recovery rate of 90. 61% and silver grade of 44. 66 g/t and silver recovery of 25. 86% were obtained respectively by the process of lead concentration by one roughing,two scaven-ging and coarse concentrate regrinding,then two cleaning,zinc concentration by one roughing,four cleaning and two scaven-ging,and the rest middlings back to the flow-sheet in turn. The process test above is the available process of the ore.