生物质化学工程
生物質化學工程
생물질화학공정
BIOMASS CHEMICAL ENGINEERING
2015年
4期
45-48
,共4页
成聃睿%史正军%刘瑞华%刘蔚漪%郑志锋%辉朝茂%邓佳
成聃睿%史正軍%劉瑞華%劉蔚漪%鄭誌鋒%輝朝茂%鄧佳
성담예%사정군%류서화%류위의%정지봉%휘조무%산가
厚壁型巨龙竹%基本密度%化学成分%纤维形态
厚壁型巨龍竹%基本密度%化學成分%纖維形態
후벽형거룡죽%기본밀도%화학성분%섬유형태
Dendrocalamus sinicus%basic density%chemical composition%fiber morphology
研究厚壁巨龙竹秆材的化学成分、纤维形态及基本密度等材性特征。材性特征研究显示,厚壁型巨龙竹秆材中不同部位的基本密度、化学成分及纤维形态存在一定的差异。其平均基本密度为0.68 g/cm3,属中等密度材;化学组成平均为:综纤维素71.01%、木质素26.12%、多戊糖15.96%;其纤维的平均长度2.19 mm、宽度19.61μm、长宽比值111、壁腔比值1.78。总体上看,厚壁型巨龙竹的基本密度适中、综纤维素含量较高、纤维形态较为优良,可以满足造纸工业对原料的基本要求。
研究厚壁巨龍竹稈材的化學成分、纖維形態及基本密度等材性特徵。材性特徵研究顯示,厚壁型巨龍竹稈材中不同部位的基本密度、化學成分及纖維形態存在一定的差異。其平均基本密度為0.68 g/cm3,屬中等密度材;化學組成平均為:綜纖維素71.01%、木質素26.12%、多戊糖15.96%;其纖維的平均長度2.19 mm、寬度19.61μm、長寬比值111、壁腔比值1.78。總體上看,厚壁型巨龍竹的基本密度適中、綜纖維素含量較高、纖維形態較為優良,可以滿足造紙工業對原料的基本要求。
연구후벽거룡죽간재적화학성분、섬유형태급기본밀도등재성특정。재성특정연구현시,후벽형거룡죽간재중불동부위적기본밀도、화학성분급섬유형태존재일정적차이。기평균기본밀도위0.68 g/cm3,속중등밀도재;화학조성평균위:종섬유소71.01%、목질소26.12%、다무당15.96%;기섬유적평균장도2.19 mm、관도19.61μm、장관비치111、벽강비치1.78。총체상간,후벽형거룡죽적기본밀도괄중、종섬유소함량교고、섬유형태교위우량,가이만족조지공업대원료적기본요구。
The basic density,component contents,and fiber morphology of bamboo culm ( Dendrocalamus sinicus L. C. Chia et J. L. Sun) were analysed in this paper. The results indicated that these properties shown a certain amount of difference in different parts of bamboo culm. The basic density of the bamboo culm was 0. 68 g/cm3 ,which was in the middle level among lignocellulosic biomass. In addition,the contents of holocellulose,lignin and pentosane were 71. 01%,26. 12% and 15. 96%,respectively. The fiber length,fiber width,length/width ratio,and wall thickness/fiber lumen diameter ratio of the bamboo culm were 2. 19 mm, 19. 61μm,111 and 1. 78,respectively. Overall,D. sinicus is one of qualified materials for pulping and papermaking due to its modest basic density,higher holocellulose content and better fiber morphology compared with other common fibrous raw materials.