润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2015年
7期
11-16
,共6页
彭龙龙%汪久根%洪玉芳%彭娟娟
彭龍龍%汪久根%洪玉芳%彭娟娟
팽룡룡%왕구근%홍옥방%팽연연
径向轴承%热弹流润滑%瞬态特性%初始条件%突变载荷
徑嚮軸承%熱彈流潤滑%瞬態特性%初始條件%突變載荷
경향축승%열탄류윤활%순태특성%초시조건%돌변재하
journal bearings%thermoelastohydrodynamic lubrication%transient characteristics%initial conditions%impact load
研究在油水两相流体润滑条件下,径向滑动轴承启动阶段液膜压力和液膜厚度等参数的变化规律,分析初始条件对轴承稳态润滑性能的影响,以及突变载荷对轴承润滑的影响。结果表明:启动阶段液膜压力先迅速增大,达到最大值后逐渐减小达到稳态,液膜温度持续增加最终达到平衡,承载瓦块处液膜厚度随着压力的增大而减小,非承载瓦块处间隙增大;不同初始载荷、温度、转速对轴承润滑性能都有显著影响;突变载荷会造成液膜压力的突变,同时对液膜温度、液膜厚度也有影响。
研究在油水兩相流體潤滑條件下,徑嚮滑動軸承啟動階段液膜壓力和液膜厚度等參數的變化規律,分析初始條件對軸承穩態潤滑性能的影響,以及突變載荷對軸承潤滑的影響。結果錶明:啟動階段液膜壓力先迅速增大,達到最大值後逐漸減小達到穩態,液膜溫度持續增加最終達到平衡,承載瓦塊處液膜厚度隨著壓力的增大而減小,非承載瓦塊處間隙增大;不同初始載荷、溫度、轉速對軸承潤滑性能都有顯著影響;突變載荷會造成液膜壓力的突變,同時對液膜溫度、液膜厚度也有影響。
연구재유수량상류체윤활조건하,경향활동축승계동계단액막압력화액막후도등삼수적변화규률,분석초시조건대축승은태윤활성능적영향,이급돌변재하대축승윤활적영향。결과표명:계동계단액막압력선신속증대,체도최대치후축점감소체도은태,액막온도지속증가최종체도평형,승재와괴처액막후도수착압력적증대이감소,비승재와괴처간극증대;불동초시재하、온도、전속대축승윤활성능도유현저영향;돌변재하회조성액막압력적돌변,동시대액막온도、액막후도야유영향。
The variations of hydrodynamic pressure and film thickness with water?in?oil lubricants during start?up were studied,the effects of initial conditions and impact load on the lubrication characteristics of journal bearing were analyzed. The results show that during the period of start?up, film pressure is increased quickly to peak and then decreased to a steady state,temperature is continuously increased before reaching steady state,and the film thickness on the bearing pads is decreased with the increase of pressure,the clearance on the non bearing pads is increased.The effects on the lubrication characteristics of bearings by different initial loads,temperatures and speeds are remarkable.Impact load can lead to the impact of film pressure,and also has influences on temperature and film thickness.