CAJ | 학술논문

采用自制固定床反应器对云南松木粉进行热解,探讨了热解温度、原料颗粒尺寸和氮气流速对云南松热解特性的影响,并采用 GC-MS 对生物油的组分含量进行分析。结果表明：在热解温度为500℃,原料颗粒尺寸为0.250~0.420 mm,氮气流速为150 mL/min条件下,生物油的产率最高为50%,液体组分主要以2,6-二叔丁基对甲酚、2-甲氧基-4-甲基苯酚、异丁香酚、愈创木酚为主,占液体总量的39.24%。
채용자제고정상반응기대운남송목분진행열해,탐토료열해온도、원료과립척촌화담기류속대운남송열해특성적영향,병채용 GC-MS 대생물유적조분함량진행분석。결과표명：재열해온도위500℃,원료과립척촌위0.250~0.420 mm,담기류속위150 mL/min조건하,생물유적산솔최고위50%,액체조분주요이2,6-이숙정기대갑분、2-갑양기-4-갑기분분、이정향분、유창목분위주,점액체총량적39.24%。
The pyrolysis of Yunnan pine was conducted in home-made,fixed-bed reactor. The effects of pyrolysis temperatures, feedstock particle size and nitrogen gas flow rate on characteristic of Yunnan pine pyrolysis were studied. And the compositions of bio-oil were identified by GC-MS. The results showed that:the highest yield of bio-oil was obtained as 50%when the pyrolysis temperature was 500℃,particle size was 0. 250-0. 420 mm,and nitrogen gas flow rate was 150 mL/min. 2,6-Di-tert-butyl-p-cresol,2-methoxy-4-methylphenol,isoeugenol,guaiacol composed the main liquid products,and accounted for 39. 24%.