环境监控与预警
環境鑑控與預警
배경감공여예경
ENVIRONMENTAL MONITORING AND FOREWARNING
2015年
4期
61-63
,共3页
电镀%竣工环保验收监测%重金属
電鍍%竣工環保驗收鑑測%重金屬
전도%준공배보험수감측%중금속
Electroplating enterprise%Environmental protection check and acceptance%Heavy metal
结合电镀企业竣工环保验收监测工作实践，对单位产品基准排水量和排气量的计算和评价，电镀标准中对污染物处理设施排气量的规定，第一类污染物在不同采样点评价标准的选择，重金属排放总量计算以及后续电镀企业废水、废气、污泥监管中存在的问题进行了探讨，并提出了相应的建议。
結閤電鍍企業竣工環保驗收鑑測工作實踐，對單位產品基準排水量和排氣量的計算和評價，電鍍標準中對汙染物處理設施排氣量的規定，第一類汙染物在不同採樣點評價標準的選擇，重金屬排放總量計算以及後續電鍍企業廢水、廢氣、汙泥鑑管中存在的問題進行瞭探討，併提齣瞭相應的建議。
결합전도기업준공배보험수감측공작실천，대단위산품기준배수량화배기량적계산화평개，전도표준중대오염물처리설시배기량적규정，제일류오염물재불동채양점평개표준적선택，중금속배방총량계산이급후속전도기업폐수、폐기、오니감관중존재적문제진행료탐토，병제출료상응적건의。
Based on practical work, this paper discussed problems existing in the environmental protection check and acceptance monitoring of electroplating enterprises at completion.These problems included calculation and evaluation of the benchmark effluent and exhaust volume per unit of product, amount of exhaust emissions specified in the electroplating standard protocol for pollutant treatment facilities, the selection of evaluation criteria for the first type of pollutants in different sampling points, and calculation of amount of heavy metal emissions.Corresponding suggestions for these problems were proposed.Problems that occurred during the subsequent supervision of the electroplating enterprises, including regulation of waste water, exhaust gas, and sludge were also dis-cussed and suggestions were provided.
