西安工业大学学报
西安工業大學學報
서안공업대학학보
JOURNAL OF XI'AN TECHNOLOGICAL UNIVERSITY
2015年
6期
441-446
,共6页
刘建强%赵慧凯%冯仑仑%李锋
劉建彊%趙慧凱%馮崙崙%李鋒
류건강%조혜개%풍륜륜%리봉
铣削加工%GH4169%铣削力%切削用量三要素
鐉削加工%GH4169%鐉削力%切削用量三要素
선삭가공%GH4169%선삭력%절삭용량삼요소
milling%GH4169%milling force%three elements of cutting data
为减小高温合金 GH4169铣削过程中切削力对加工精度及表面质量的影响,采用Deform 3D 有限元方法对高温合金 GH4169铣削过程中的铣削力进行了建模与仿真。通过铣削力正交试验验证了模型的准确度。利用单因素仿真实验分析了铣削参数对铣削力的影响规律。仿真与试验结果表明:端铣高温合金 GH4169时铣削力仿真值与试验值基本吻合,模型准确度优于其他铣削力模型;在切削用量三要素中,对铣削力影响最大的是铣削深度,其次是进给量和铣削宽度,影响最小的是铣削速度。
為減小高溫閤金 GH4169鐉削過程中切削力對加工精度及錶麵質量的影響,採用Deform 3D 有限元方法對高溫閤金 GH4169鐉削過程中的鐉削力進行瞭建模與倣真。通過鐉削力正交試驗驗證瞭模型的準確度。利用單因素倣真實驗分析瞭鐉削參數對鐉削力的影響規律。倣真與試驗結果錶明:耑鐉高溫閤金 GH4169時鐉削力倣真值與試驗值基本吻閤,模型準確度優于其他鐉削力模型;在切削用量三要素中,對鐉削力影響最大的是鐉削深度,其次是進給量和鐉削寬度,影響最小的是鐉削速度。
위감소고온합금 GH4169선삭과정중절삭력대가공정도급표면질량적영향,채용Deform 3D 유한원방법대고온합금 GH4169선삭과정중적선삭력진행료건모여방진。통과선삭력정교시험험증료모형적준학도。이용단인소방진실험분석료선삭삼수대선삭력적영향규률。방진여시험결과표명:단선고온합금 GH4169시선삭력방진치여시험치기본문합,모형준학도우우기타선삭력모형;재절삭용량삼요소중,대선삭력영향최대적시선삭심도,기차시진급량화선삭관도,영향최소적시선삭속도。
Based on Software Deform 3D,the finite element method is used of to simulate the process of the Super-Alloy GH4169 milling,and then to verify the accuracy of the model by means of orthogonal experiment.The influence rules of milling parameters on milling forces are analyzed by using single factor simulation experiment.A comparison is made between simulated results and experimental values. The simulated results agree well with the experimental values,and have high accuracy.In the process, GH4169 milling force is most influenced by the milling depth,followed by feed and milling width,the least is the milling speed.