西安工业大学学报
西安工業大學學報
서안공업대학학보
JOURNAL OF XI'AN TECHNOLOGICAL UNIVERSITY
2015年
6期
431-433,440
,共4页
王垚廷%张瑞红%李光耀%张博伦
王垚廷%張瑞紅%李光耀%張博倫
왕요정%장서홍%리광요%장박륜
高斯光束%束腰位置%束腰半径%传输特性%对称性
高斯光束%束腰位置%束腰半徑%傳輸特性%對稱性
고사광속%속요위치%속요반경%전수특성%대칭성
Gaussian beam%waist location%waist radius%propagation characteristics%symmetry
研究了如何提高高斯光束束腰位置及束腰半径的测量精度.从高斯光束的对称性出发,测量了其束腰位置.根据高斯光束通过薄透镜的传输特性,结合已确定的聚焦高斯光束的束腰位置,得到了待测高斯光束的束腰位置及束腰尺寸.根据高斯光束的对称性,直接确定了待测高斯光束的束腰位置,进而在该位置对束腰半径进行了实际测量.结果表明:反推的束腰位置及尺寸分别可精确到0.01 mm 和0.1 mm,且反推结果和实际测量结果一致.
研究瞭如何提高高斯光束束腰位置及束腰半徑的測量精度.從高斯光束的對稱性齣髮,測量瞭其束腰位置.根據高斯光束通過薄透鏡的傳輸特性,結閤已確定的聚焦高斯光束的束腰位置,得到瞭待測高斯光束的束腰位置及束腰呎吋.根據高斯光束的對稱性,直接確定瞭待測高斯光束的束腰位置,進而在該位置對束腰半徑進行瞭實際測量.結果錶明:反推的束腰位置及呎吋分彆可精確到0.01 mm 和0.1 mm,且反推結果和實際測量結果一緻.
연구료여하제고고사광속속요위치급속요반경적측량정도.종고사광속적대칭성출발,측량료기속요위치.근거고사광속통과박투경적전수특성,결합이학정적취초고사광속적속요위치,득도료대측고사광속적속요위치급속요척촌.근거고사광속적대칭성,직접학정료대측고사광속적속요위치,진이재해위치대속요반경진행료실제측량.결과표명:반추적속요위치급척촌분별가정학도0.01 mm 화0.1 mm,차반추결과화실제측량결과일치.
A accurate method of measuring the Gaussian beam waist location and waist size is presented,According to the Gaussian beam symmetry,the waist location can be obtained simultaneously. The waist location and waist size are also measured directly by the Gaussian beam symmetry and the characteristics of propagation through thin lens.The precision of derivation results on beam waist location and size is 0.01 mm and 0.1 mm,respectively.The theoretical results are in good agreement with the experimentally measured results.