CAJ | 학술논문

为了分析电主轴150 MD24 Z7.5水冷系统对其电机的冷却功效，采用有限元软件建立流固耦合传热模型，数值模拟分析了水流速度对电机的冷却效果。模拟分析发现，当流速相对较小时，流速的改变对电主轴的冷却效果的影响较大，但随流速继续增大，对电主轴冷却效果的影响逐渐减小直至饱和。针对仿真结果进行试验验证，试验结果与仿真结果相符。从而为电主轴冷却参数优化提供了理论基础，满足电主轴电机冷却的技术要求。
위료분석전주축150 MD24 Z7.5수랭계통대기전궤적냉각공효，채용유한원연건건립류고우합전열모형，수치모의분석료수류속도대전궤적냉각효과。모의분석발현，당류속상대교소시，류속적개변대전주축적냉각효과적영향교대，단수류속계속증대，대전주축냉각효과적영향축점감소직지포화。침대방진결과진행시험험증，시험결과여방진결과상부。종이위전주축냉각삼수우화제공료이론기출，만족전주축전궤냉각적기술요구。
In order to analyze the cooling function of the water cooling system on the 150MD24Z7. 5 motor-ized spindle, a fluid-solid coupling heat transfer model established in finite element software and numerical simulation analyzes the cooling water velocity effect on the motor of the motorized spindle. Simulation re-sults shows that when the cooling water velocity was relatively small, it has a great influence with the veloci-ty changed on the cooling effect and with the flow velocity increased , the difference in cooling effect was inappreciable . Experiments were conducted according to the results of theSimulation analysis and the experi-mental temperature is consistent with simulation results. Consequently, an theoretical basis is offered for the parameter optimization of motorized spindle cooling system which can meet the requirementsof high-speed spindle motor cooling technology.