CAJ | 학술논문

对爬波产生的有关波型和机理进行了分析，根据丝材和小棒材对超声波检测的要求，利用自行研制的线聚焦单晶片爬波探头，提出了一种丝材和小棒材的超声爬波检测方法；并且给出了不同材料和直径、不同位置和尺寸的人工和自然裂纹的丝材(直径不大于3 mm)和小棒材(直径不大于12 mm)的超声爬波检测的试验结果。结果表明，丝材和小棒材的超声爬波检测方法是可行和有效的。
대파파산생적유관파형화궤리진행료분석，근거사재화소봉재대초성파검측적요구，이용자행연제적선취초단정편파파탐두，제출료일충사재화소봉재적초성파파검측방법；병차급출료불동재료화직경、불동위치화척촌적인공화자연렬문적사재(직경불대우3 mm)화소봉재(직경불대우12 mm)적초성파파검측적시험결과。결과표명，사재화소봉재적초성파파검측방법시가행화유효적。
Analysis and research on the wave type and mechanism of the creeping wave were made.According to the requirement of the wires and bars for the ultrasonic testing,self-developed creeping wave probe using line focus single chip was proposed for the ultrasonic creeping wave detection of wires and bars.Various results using creep wave ultrasound testing of wires (diameter less than 3 mm)and small bars (diameter not greater than 12 mm)of different materials with different locations and sizes of artificial and natural crack,respectively were given.The results show that the ultrasonic creeping wave detection method is feasible and effective.