装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2015年
4期
72-75,94
,共5页
殷宗莲%黄波%胥泽奇%刘杰%张凯
慇宗蓮%黃波%胥澤奇%劉傑%張凱
은종련%황파%서택기%류걸%장개
底塞%30CrMnSiNi2A%30CrMnSiA%霉菌试验%防护工艺%润滑脂
底塞%30CrMnSiNi2A%30CrMnSiA%黴菌試驗%防護工藝%潤滑脂
저새%30CrMnSiNi2A%30CrMnSiA%매균시험%방호공예%윤활지
base plug%30CrMnSiNi2A%30CrMnSiA%mold test%protection technology%grease
目的:研究某炮弹底塞最佳表面防护工艺。方法采用霉菌试验方法,对2种底塞材料多种表面处理与防护工艺样品的防霉性和防腐蚀性能进行试验和优选。结果分析了防霉性和防腐蚀性能优劣的原因,评定出了最优的材料和表面处理与防护工艺组合,提出了炮弹长贮防霉和防腐蚀的建议和措施。结论底塞最佳的材料和表面处理与防护工艺组合为30CrMnSiA+镀锌/镀锌镍合金+涂7258号航空润滑油脂。
目的:研究某砲彈底塞最佳錶麵防護工藝。方法採用黴菌試驗方法,對2種底塞材料多種錶麵處理與防護工藝樣品的防黴性和防腐蝕性能進行試驗和優選。結果分析瞭防黴性和防腐蝕性能優劣的原因,評定齣瞭最優的材料和錶麵處理與防護工藝組閤,提齣瞭砲彈長貯防黴和防腐蝕的建議和措施。結論底塞最佳的材料和錶麵處理與防護工藝組閤為30CrMnSiA+鍍鋅/鍍鋅鎳閤金+塗7258號航空潤滑油脂。
목적:연구모포탄저새최가표면방호공예。방법채용매균시험방법,대2충저새재료다충표면처리여방호공예양품적방매성화방부식성능진행시험화우선。결과분석료방매성화방부식성능우렬적원인,평정출료최우적재료화표면처리여방호공예조합,제출료포탄장저방매화방부식적건의화조시。결론저새최가적재료화표면처리여방호공예조합위30CrMnSiA+도자/도자얼합금+도7258호항공윤활유지。
Objective To study the optimal surface protection technology for Base Plug of a type of bullet. Methods Mold test method was used to test the anti-mold property and corrosion resistance of specimens of two kinds of base plug materials processed by different protection technologies. Results The causes for the different corrosion resistance and anti-mold performance was analyzed, the optimal combination of material and surface protection technology was selected, and some suggestions and measures for long storage and corrosion proof of bullets were put forward. Conclusion The optimal material and surface protection technology for base plug of bullet was 30CrMnSiA+galvanizing/zinc-nickel alloy coating+coating with 7258 aviation grease.